激光超声测量T800/QY9511复合材料工程常数的有限元模拟
陈春明, 战宇, 刘常升, 方奔. 激光超声测量T800/QY9511复合材料工程常数的有限元模拟[J]. 激光技术, 2019, 43(1): 88.
CHEN Chunming, ZHAN Yu, LIU Changsheng, FANG Ben. Finite element simulation of engineering constants of T800/QY9511 composites measured by laser ultrasonic[J]. Laser Technology, 2019, 43(1): 88.
[1] HE M B, MA Zh L, WEI Ch H, et al. Influence of pyrolysis on the laser ablation of carbon-fiber/epoxy composite[J]. Infrared and Laser Engineering, 2016, 45(3):97-100 (in Chinese).
[2] YOSHIDA T, MATSUI S, HOSHINO M, et al. Measurement of elastic constants for composite materials by 3-point bending, twisting and impact sound test[J].Key Engineering Materials, 2004, 261/263:1611-1616.
[3] MOUCHTACHI A, GUERJOUMA R E, BABOUX J C, et al. Optimal determination of the elastic constants of woven 2D SiC/SiC composite materials[J]. Journal of Physics,2004, D37(23):3323-3329.
[4] VENETIS J, SIDERIDIS E. Elastic constants of fibrous polymer composite materials reinforced with transversely isotropic fibers[J]. AIP Advances, 2015, 5(3):037118.
[5] LIU X, WU Zh J, HE H Y, et al. Cryogenic mechanical properties of unidirectional carbon fiber reinforced epoxy composite [J]. Acta Materiae Compositae Sinica, 2017, 34(11):2437-2445(in Chinese).
[6] ZHOU Zh G, SUN G K, LI Zh, et al. Application of laser ultrasonic testing technology in composite material[J]. Journal of Harbin University of Science and Technology,2012, 17(6):119-122(in Chin-ese).
[7] BALASUBRAMANIAM K, RAO N S. Inversion of composite material elastic constants from ultrasonic bulk wave phase velocity data using genetic algorithms[J]. Composites(Engineering), 1998, B29(2):171-180.
[8] CASTAGNEDE B, KWANG Y K, WOLFGANG S, et al. Determination of the elastic constants of anisotropic materials using laser-generated ultrasonic signals[J]. Journal of Applied Physics, 1991, 70(1): 150-157.
[9] WU T T, LIU Y H. Inverse determinations of thickness and elastic properties of a bonding layer using laser-generated surface waves[J]. Ultrasonics, 1999, 37(1):23-30.
[10] ADAMOWSKI J C, BUIOCHI F, HIGUTI R T. Ultrasonic material characterization using large-aperture PVDF receivers[J]. Ultrasonics, 2010, 50(2):110-115.
[11] ZHAN Y, LIU Ch H, XUE J Ch. Simulation of laser ultrasonic detection micro crack by equivalent load method[J]. Infrared and Laser Engineering, 2016, 45(10):72-76 (in Chinese).
[13] WANG M Y, ZHOU Y J, GUO Ch. Numerical simulation of laser ultrasonic detection of surface micro-crack depth[J]. Laser Techno-logy, 2017, 41(2):178-181(in Chinese).
[15] DONG L M, NI Ch Y, SHEN Zh H. Determination of elastic constants of materials based on the velocity measurement of laser-generated multi-mode ultrasound[J]. Chinese Journal of Lasers, 2014,38(4):0408004(in Chinese).
[16] SONG Y F, YU G Y, YIN H D, et al. Temperature dependence of elastic modulus of single crystal sapphire investigated by laser ultrasonic[J]. Acta Physica Sinica, 2012, 61(6):64211 (in Chin-ese).
[17] ZHAN Y, LIU C, ZHANG F, et al. Experimental study and finite element analysis based on equivalent load method for laser ultrasonic measurement of elastic constants[J]. Ultrasonics, 2016, 69:243-247.
[19] MOUCHTACHI A, DUBUGET M, DEBAH S, et al. Recovering elastic constants of metal matrix composites via piezoelectric transducers and laser generated and detected ultrasonic waves[C]//1994 Proceedings of Ultrasonics Symposium. New York,USA:IEEE, 1994:1223-1226.
[20] WU T T, LIU Y H. On the measurement of anisotropic elastic constants of fiber-reinforced composite plate using ultrasonic bulk wave and laser generated Lamb wave[J]. Ultrasonics, 1999, 37(6):405-412.
[22] MUKDADI O M, DATTA S K. Transient ultrasonic guided waves in bilayered anisotropic plates with rectangular cross section[J]. AIP Conference Proceedings, 2004,70(1):238-245.
[26] MOREAU A, TAHERI F. Elastic moduli measurements of SiC reinforced alumina at high temperatures using laser-ultrasonics[J]. Materials Science Forum, 1996, 210/213:235-242.
陈春明, 战宇, 刘常升, 方奔. 激光超声测量T800/QY9511复合材料工程常数的有限元模拟[J]. 激光技术, 2019, 43(1): 88. CHEN Chunming, ZHAN Yu, LIU Changsheng, FANG Ben. Finite element simulation of engineering constants of T800/QY9511 composites measured by laser ultrasonic[J]. Laser Technology, 2019, 43(1): 88.