[1] 张明军, 陈根余, 李时春 等. 车用铝合金与镀锌钢光纤激光搭接焊试验研究［J］. 中国激光, 2011, 38(6): 0603010

    Zhang Mingjun, Chen Genyu, Li Shichun et al.. Experimental investigation on fiber laser overlap welding of automotive aluminum to galvanized steel［J］. Chinese J. Lasers, 2011, 38(6): 0603010

[2] 翟玉峰, 黄坚, 李敏 等. 6061-T6铝合金高速高功率CO2激光填丝焊接性的研究［J］. 中国激光, 2011, 38(5): 0503001

    Zhai Yufeng, Huang Jian, Li Min et al.. Research on high speed high power CO2 laser welding of 6061-T6 aluminum with filler wire［J］. Chinese J. Lasers, 2011, 38(5): 0503001

[3] A. F. M. Arif. Effect of input variability on the quality of laser shock processing［J］. J. Mechanical Science and Technology, 2009, 23(10): 2603～2611

[4] L. Z. Liang, L. J. Hui, S. Y. Sheng et al.. Characteristics of complicated AISI316L automobile components manufactured by powder/metallurgy［J］. J. Mechanical Science and Technology, 2009, 23(7): 1924～1931

[5] L. Quintino, A. Costa, R. Miranda et al.. Welding with high power fiber lasers-a preliminary study［J］. Materials & Design, 2007, 28(4): 1231～1237

[6] T. Sibillano, A. Ancona, V. Berardi et al.. A study of the shielding gas influence on the laser beam welding of AA5083 aluminium alloys by process spectroscopic investigation［J］. Opt. Laser in Engng., 2006, 44(10): 1039～1051

[7] Y. Yu, C. Wang, X. Hu et al.. Porosity in fiber laser formation of 5A06 aluminum alloy［J］. J. Mechanical Science and Technology, 2010, 24(5): 1077～1082

[8] A. Haboudou, P. Peyre, A. B. Vannes et al.. Reduction of porosity content generated during NdYAG laser welding of A356 and AA5083 aluminium alloys［J］. Materials Science and Engineering: A, 2003, 363(1-2): 40～52

[9] 余阳春. 激光填丝焊的焊丝熔入行为及工艺研究［D］. 武汉: 华中科技大学, 2010

    Yu Yangchun. Study on the Technology and Filler Wire Melting Dynamics during the Laser Welding with Filler Wire［D］. Wuhan: Huazhong University of Science and Techonolgy, 2010