[1] Vavrik D, Dammer J, Jakubek J. et al. Advanced X-ray radiography and tomography in several engineering applications[J]. Nuclear Instruments and Methods in Physics Research Section A, 2011, 633(S1): 152-155.

    Vavrik D, Dammer J, Jakubek J. et al. Advanced X-ray radiography and tomography in several engineering applications[J]. Nuclear Instruments and Methods in Physics Research Section A, 2011, 633(S1): 152-155.

[2] 陈思宇, 李磊, 闫镔, 等. 基于动态电流的锥束CT环状伪影校正方法[J]. 光学学报, 2016, 36(6): 0634001.

    陈思宇, 李磊, 闫镔, 等. 基于动态电流的锥束CT环状伪影校正方法[J]. 光学学报, 2016, 36(6): 0634001.

    Chen Siyu, Li Lei, Yan Bin, et al. Ring artifacts correction method based on dynamic current for cone beam CT[J]. Acta Optica Sinica, 2016, 36(6): 0634001.

    Chen Siyu, Li Lei, Yan Bin, et al. Ring artifacts correction method based on dynamic current for cone beam CT[J]. Acta Optica Sinica, 2016, 36(6): 0634001.

[3] Cho M K, Youn H, Jang S Y, et al. Cone-beam digital tomosynthesis for thin slab objects[J]. NDT & E International, 2012, 47(2): 171-176.

    Cho M K, Youn H, Jang S Y, et al. Cone-beam digital tomosynthesis for thin slab objects[J]. NDT & E International, 2012, 47(2): 171-176.

[4] Liu T. Cone-beam CT reconstruction for planar object[J]. NDT & E International, 2012, 45(1): 9-15.

    Liu T. Cone-beam CT reconstruction for planar object[J]. NDT & E International, 2012, 45(1): 9-15.

[5] Gondrom S, Zhou J, Maisl M, et al. X-ray computed laminography: an approach of computed tomography for applications with limited access[J]. Nuclear Engineering and Design, 1999, 190(1): 141-147.

    Gondrom S, Zhou J, Maisl M, et al. X-ray computed laminography: an approach of computed tomography for applications with limited access[J]. Nuclear Engineering and Design, 1999, 190(1): 141-147.

[6] Fu J, Jiang B H, Li B. Large field of view computed laminography with the asymmetric rotational scanning geometry[J]. Science China Technological Sciences, 2010, 53(8): 2261-2271.

    Fu J, Jiang B H, Li B. Large field of view computed laminography with the asymmetric rotational scanning geometry[J]. Science China Technological Sciences, 2010, 53(8): 2261-2271.

[7] Yang M, Wang G, Liu Y Z. New reconstruction method for X-ray testing of multilayer printed circuit board[J]. Optical Engineering, 2010, 49(5): 056501.

    Yang M, Wang G, Liu Y Z. New reconstruction method for X-ray testing of multilayer printed circuit board[J]. Optical Engineering, 2010, 49(5): 056501.

[8] Que J M, Cao D Q, Zhao W, et al. Computed laminography and reconstruction algorithm[J]. Chinese Physics C, 2012, 36(8): 777-783.

    Que J M, Cao D Q, Zhao W, et al. Computed laminography and reconstruction algorithm[J]. Chinese Physics C, 2012, 36(8): 777-783.

[9] Yang M, Zhang J H, Yuan M D, et al. Calibration method of projection coordinate system for X-ray cone-beam laminography scanning system[J]. NDT & E International, 2012, 52: 16-22.

    Yang M, Zhang J H, Yuan M D, et al. Calibration method of projection coordinate system for X-ray cone-beam laminography scanning system[J]. NDT & E International, 2012, 52: 16-22.

[10] Yang M, Zhu J H, Liu Q, et al. A practical method to calibrate the slant angle of central X-ray for laminography scanning system[J]. NDT & E International, 2014, 64: 13-20.

    Yang M, Zhu J H, Liu Q, et al. A practical method to calibrate the slant angle of central X-ray for laminography scanning system[J]. NDT & E International, 2014, 64: 13-20.

[11] Noo F, Clackdoyle R, Mennessier C, et al. Analytic method based on identification of ellipse parameters for scanner calibration in cone-beam tomography[J]. Physics in Medicine and Biology, 2000, 45(11): 3489-3508.

    Noo F, Clackdoyle R, Mennessier C, et al. Analytic method based on identification of ellipse parameters for scanner calibration in cone-beam tomography[J]. Physics in Medicine and Biology, 2000, 45(11): 3489-3508.

[12] Yang K. Kwan A L C, Miller D W F, et al. A geometric calibration method for cone beam CT systems[J]. Medical Physics, 2006, 33(6): 1695-1706.

    Yang K. Kwan A L C, Miller D W F, et al. A geometric calibration method for cone beam CT systems[J]. Medical Physics, 2006, 33(6): 1695-1706.

[13] WuD, LiL, ZhangL, et al. Geometric calibration of cone-beam CT with a flat-panel detector[C]. IEEE Nuclear Science Symposium and Medical Imaging Conference, 2011.

    WuD, LiL, ZhangL, et al. Geometric calibration of cone-beam CT with a flat-panel detector[C]. IEEE Nuclear Science Symposium and Medical Imaging Conference, 2011.

[14] Cho Y, Moseley D J, Siewerdsen J H, et al. Accurate technique for complete geometric calibration of cone-beam computed tomography systems[J]. Medical Physics, 2005, 32(4): 968-983.

    Cho Y, Moseley D J, Siewerdsen J H, et al. Accurate technique for complete geometric calibration of cone-beam computed tomography systems[J]. Medical Physics, 2005, 32(4): 968-983.

[15] Sun Y, Hou Y, Zhao F Y, et al. A calibration method for misaligned scanner geometry in cone-beam computed tomography[J]. NDT & E International, 2006, 39(6): 499-513.

    Sun Y, Hou Y, Zhao F Y, et al. A calibration method for misaligned scanner geometry in cone-beam computed tomography[J]. NDT & E International, 2006, 39(6): 499-513.

[16] Zhang F, Du J P, Jiang H, et al. Iterative geometric calibration in circular cone-beam computed tomography[J]. Optik-International Journal for Light and Electron Optics, 2014, 125(11): 2509-2514.

    Zhang F, Du J P, Jiang H, et al. Iterative geometric calibration in circular cone-beam computed tomography[J]. Optik-International Journal for Light and Electron Optics, 2014, 125(11): 2509-2514.

[17] Kingston AM, SakellariouA, Sheppard AP, et al. An auto-focus method for generating sharp 3D tomographic images[C]. SPIE, 2010, 7804: 78040J.

    Kingston AM, SakellariouA, Sheppard AP, et al. An auto-focus method for generating sharp 3D tomographic images[C]. SPIE, 2010, 7804: 78040J.

[18] HartleyR, ZissermanA. Multiple view geometry in computer vision[M]. 2nd edition. Cambridge: Cambridge University Press, 2003.

    HartleyR, ZissermanA. Multiple view geometry in computer vision[M]. 2nd edition. Cambridge: Cambridge University Press, 2003.