[1] K Nagarathnam, K Komvopoulos. Microstuctural analysis and oxidation behavior of laser-processed Fe-Cr-Al-Y alloy coatings[J]. Metall Mater Trans A, 1996, 27(2): 381-390.

[2] 曾晓燕, 吴新伟, 陶曾毅, 等. 激光熔覆Ni-WC 金属陶瓷层的耐磨性分析[J].金属学报,1997, 33(8): 885-890.

    Zeng Xiaoyan, Wu Xinwei, Tao Zengyi, et al.. Abrasive wear risistance analyses of laser clad Ni-WC ceramic-metal composite coatings[J]. Acta Metallurgica Sinica, 1997, 33(8): 885-890.

[3] 张坚, 吴文妮, 赵龙志. 激光熔覆研究现状及发展趋势[J]. 热加工与工艺, 2013, 42(6): 131-135.

    Zhang Jian, Wu Wenni, Zhao Longzhi. Research progress and development trend of laser cladding[J]. Hot Working Technology, 2013, 42(6): 131-135.

[4] 钟敏霖, 刘文今, 任家烈. NiCrSiB 合金高功率激光送粉熔敷裂纹形成的敏感因素[J]. 应用激光, 2000, 20(5): 25-30.

    Zhong Minlin, Liu Wenjin, Ren Jialie. The critical influence factors on crack formation during high power CO2 laser cladding of NiCrSiB alloy by powder feeding[J]. Appl Laser, 2000, 20(5): 25-30.

[5] A Techel, L M Berger, S Nowotny. Microstructure of advanced Tic-based coatings prepared by laser cladding[J]. Journal of Thermal Spray Technology, 2007, 16(3): 374-380.

[6] 朱刚贤, 张安峰, 李涤尘. 激光熔覆工艺参数对熔覆层表面平整度的影响[J]. 中国激光, 2010, 37(1): 296-301.

    Zhu Gangxian, Zhang Anfeng, Li Dichen. Effect of process parameters on surface smoothness in laser cladding[J]. Chinese J Lasers, 2010, 37(1): 296-301.

[7] 王东生, 田宗军, 王泾文, 等. 一种通过改变激光功率密度分布控制熔覆层裂纹的方法[J]. 中国激光, 2011, 38(1): 0103004.

    Wang Dongsheng, Tian Zongjun, Wang Jingwen, et al.. A method of crack control in laser cladding process with changing power density distribution of laser beam[J]. Chinese J Lasers, 2011, 38(1): 0103004.

[8] 张思玉, 郑克全, 郑立. 扫描速度对激光熔覆WC-B4C-Co涂层显微组织和性能的影响[J]. 中国激光, 1993, 20(12): 940-943.

    Zhang Siyu, Zheng Kequan, Zheng Li. Influence of scanning speeds on microstructure and properties of laser cladding WC-B4C-Co[J]. Chinese J Lasers, 1993, 20(12): 940-943.

[9] 郭士锐, 陈智君, 张群莉, 等. 不同压力对气雾化激光熔覆专用合金粉末的影响[J]. 中国激光, 2013, 40(6): 0603001.

    Guo Shirui, Chen Zhijun, Zhang Qunli, et al.. Effects of different pressures on laser cladding special powder prepared by gas atomization[J]. Chinese J Lasers, 2013, 40(6): 0603001.

[10] 鲁青龙, 王彦芳, 栗荔, 等. 扫描速度对激光熔覆铁基非晶复合涂层组织与性能的影响[J]. 中国激光, 2013, 40(2): 0203007.

    Lu Qinglong, Wang Yanfang, Li Li, et al.. Effects of scanning speed on microstructures and properties of laser cladding Fe-based amorphous composite coatings[J]. Chinese J Lasers, 2013, 40(2): 0203007.

[11] 李维特, 黄保海, 毕仲波. 热应力理论分析及应用[M]. 北京: 中国电力出版社, 2004.

    Li Weite, Huang Baohai, Bi Zhongbo. Theory Analysis and Application of the Thermodynamics[M]. Beijing: China Electric Power Press, 2004.

[12] 邹小斌, 尹登科, 谷建军. 关于激光熔覆裂纹问题的研究[J]. 激光杂志, 2010, 31(5): 44-45.

    Zou Xiaobin, Yin Dengke, Gu Jianjun. Research on cracking of laser cladding[J]. Laser Journal, 2010, 31(5): 44-45.