[1] 雷蔓, 吕健, 刘征宏, 等.基于逆向工程与3D打印的工艺品保护与开发［J］.制造业自动化 2014, 36(5): 141-144.

    LEI MAN, LV JIAN, LIU ZHENGHONG, et al.Protection and development of handicrafts based on reverse engineering and 3Dprint［J］.Manufacturing Automation, 2014, 36(5): 141-144.

[2] POLZIN CHRISTIAN, SPATH SEBASTIAN, SEITZ HERMANN.Characterization and evaluation of a PMMA-based 3D printing process［J］.Rapid Prototyping, 2013, 19(1): 37-43.

[3] 翁子清, 董刚, 张群莉, 等.退火对激光熔覆FeCrNiCoMn高熵合金涂层组织与性能的影响［J］.中国激光, 2014, 41(3): 65-70.

    WENG ZIQING, DONG GANG, ZHANG QUNLI, et al.Effects of annealing on microstructure and properties of FeCrNiCoMn high entropy alloy coating prepared by laser cladding［J］.Chinese Journal of Lasers, 2014, 41(3): 65-70.

[4] 高美娜, 王续跃, 徐文骥, 等.不锈钢-碳钢层合板激光熔覆制备方法试验研究［J］.激光与光电子学进展, 2014, 51(2): 120-127.

    GAO MEINA, WANG XUYAUE, XU WENJI, et al.Experimental study on the stainless-carbon steel laminated plates prepared by laser cladding［J］.Laser & Optoelectronics Progress, 2014, 51(2): 120-127.

[5] 周野飞, 高士友, 王京京.激光熔覆高碳铁基合金组织性能研究［J］.中国激光, 2013, 40(12): 46-50.

    ZHOU YEFEI, GAO SHIYOU, WANG JJINGJING. Microstucture-property of laser cladding high carbon Fe-based alloy［J］.Chinese Journal of Lasers, 2013, 40(12): 46-50.

[6] 高雪松, 田宗军, 沈理达, 等.激光熔覆Al2O3-13%TiO2陶瓷层制备及其抗热震性能［J］.中国激光, 2012, 39(2): 91-96.

    GAO XUESONG, TIAN ZONGJUN, SHEN LIDA, et al.Study on Al2O3-13%TiO2 coating prepared by laser cladding and thermal shock resistance［J］.Chinese Journal of Lasers, 2012, 39(2): 91-96.

[7] 李美艳, 韩彬, 王勇, 等.B4C和Ti含量对激光熔覆Fe-Cr-Ni-Si系合金涂层结构及性能影响［J］.中国激光, 2013, 40(12): 92-96.

    LI MEIYAN, HAN BIN, WANG YONG, et al.Effects of B4C and Ti contents on structure and property of laser cladding Fe-Cr-Ni-Si alloy coating［J］.Chinese Journal of Lasers, 2013, 40(12): 92-96.

[8] 吴东江, 褚洋, 牛方勇, 等.双激光束熔覆过程平顶辅助光束对陶瓷涂层温度场的影响［J］.中国激光, 2014, 41(7): 125-130.

    WU DONGJIANG, CHU XIANG, NIU FANGYONG, et al. Influence of temperature distribution of ceramic coating using top-hat assistance laser beam in dual-beam laser cladding［J］.Chinese Journal of Lasers, 2014, 41(7): 125-130.

[9] 王义, 刘海韬, 程海峰, 等.氧化物/氧化物陶瓷基复合材料的研究进展［J］.无机材料学报, 2014, 29(7): 673-680.

    WANG YI, LIU HAITAO, CHENG HAIFENG, et al. Research progress on oxide/oxide ceramic matrix composites［J］.Journal of Inorganic Materials, 2014, 29(7): 673-680.

[10] 杨燕.石英纤维/有机硅树脂复合材料的制备及性能研究［D］.哈尔滨: 哈尔滨工业大学, 2011: 11-17.

    YANG YAN.Fabrication and properties of quartz fiber/organic silicone resin composites［D］. Harbin: Harbin Institute of Technology, 2011: 11-17.

[11] 韦其红, 李伶, 李勇, 等.石英纤维复合材料强化处理工艺的研究［J］.硅酸盐通报, 2009, 28(1): 67-70.

    WEI QIHONG, LI LING, LI YONG, et al.Study on strengthening progress of quartz fiber composites［J］.Bulletin of the Chinese Ceramic Society, 2009, 28(1): 67-70.

[12] 陈东, 居建国, 郝旭峰.石英纤维/KH308复合材料的介电性能［J］.复合材料学报, 2014, 31(3): 563-568.

    CHEN DONG, JU JIANGUO, HAO XUFENG.Dielectric properties of quartz fiber reinforced KH308 composites［J］.Acta Materiae Compositae Sinica, 2014, 31(3): 563-568.

[13] KATAYAMA S, KAWAHITO Y.Laser direct joining of metal and plastic［J］.Scripta Materialia, 2008, 59(12): 1247-1250.

[14] KAWAHITO Y, NIWA Y, KATAYAMA S.Laser direct joining of glassy metal Zr55Al10Ni5Cu30 to engineering plastic polyethylene terephthalate［J］.Materials Transactions, 2010, 51(8): 1433-1436.

[15] WAHBA M, KAWAHITO Y, KATAYAMA S.Laser direct joining of AZ91D thixomolded Mg alloy and amorphous polyethylene terephthalate［J］.Journal of Materials Processing Technology, 2011, 211(6): 1166-1174.

[16] KAWAHITO Y, KATAYAMA S.Laser direct joining of carbon fiber reinforced plastic to stainless steel［J］. Science and Technology of Welding and Joining, 2011, 16(8): 676-680.

[17] JUNG K W, KAWAHITO Y, TAKAHASHI M, et al.Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel［J］.Materials and Design, 2013(47): 179-188.