[1] 沈功田, 景为科. 埋地管道无损检测技术[J]. 无损检测, 2006, 28(3): 137-150.

    Shen G T, Jing W K. Review of nondestructive testing technique for buried pipelines[J]. Nondestructive Testing, 2006, 28(3): 137-150.

[2] 左延田, 俞厚德. 在用埋地钢质管道管体无损检测技术[J]. 化工装备技术, 2010, 31(6): 53-56.

    Zuo Y T, Yu H D. Methods of NDT technique for buried pipelines[J]. Chemical Equipment Technology, 2010, 31(6): 53-56.

[3] 张跃强, 张早校, 郝建成, 等. 管道超声导波检测技术进展[J]. 化工设备与管道, 2016( 3): 72- 75.

    Zhang YQ, Zhang ZX, Hao JC, et al. Development of ultrasonic guided wave technique used in pipeline inspection[J]. Process Equipment & Piping, 2016( 3): 72- 75.

[4] 卢泓方, 吴晓南, Tom I, 等. 国外天然气管道检测技术现状及启示[J]. 天然气工业, 2018, 38(2): 103-111.

    Lu H F, Wu X N, Tom I, et al. The status quo of natural gas line pipe inspection technologies abroad and its implications for China[J]. Natural Gas Industry, 2018, 38(2): 103-111.

[5] 戴景民, 汪子君. 红外热成像无损检测技术及其应用现状[J]. 自动化技术与应用, 2007, 26(1): 1-7.

    Dai J M, Wang Z J. Infrared thermography non-destructive testing technology and its applications[J]. Techniques of Automation and Applications, 2007, 26(1): 1-7.

[6] Lahiri B B, Bagavathiappan S, Soumya C, et al. Infrared thermography based defect detection in ferromagnetic specimens using a low frequency alternating magnetic field[J]. Infrared Physics & Technology, 2014, 64: 125-133.

[7] Endo H, Kusaka T. Efficient inspection for gas pipes by infrared thermography[J]. Technology Review, 2015, 33(2): 50-55.

[8] 王永茂, 郭兴旺, 李日华. 红外检测中缺陷大小和深度的测量[J]. 激光与红外, 2002, 32(6): 404-406.

    Wang Y M, Guo X W, Li R H. Measuring defect diameter and depth in infrared testing[J]. Laser & Infrared, 2002, 32(6): 404-406.

[9] 王永茂, 郭兴旺, 李日华, 等. 缺陷大小和深度的红外检测[J]. 无损检测, 2003, 25(9): 458-461.

    Wang Y M, Guo X W, Li R H, et al. Defect dimension and depth measurement by infrared thermography[J]. Nondestructive Testing, 2003, 25(9): 458-461.

[10] 杨黎俊, 耿完桢, 姜铃珍, 等. 红外成象检测中的缺陷大小评估[J]. 无损检测, 1999, 21(2): 65-67.

    Yang L J, Geng W Z, Jiang L Z, et al. Evaluation of defect size in infrared imaging testing[J]. Nondestructive Testing, 1999, 21(2): 65-67.

[11] 朱亚昆, 朱志彬, 郑荣部, 等. 红外热像无损检测的热激励技术[J]. 石油化工设备, 2014, 43(4): 86-89.

    Zhu Y K, Zhu Z B, Zheng R B, et al. Thermal excitation method in infrared thermography nondestructive testing[J]. Petro-Chemical Equipment, 2014, 43(4): 86-89.

[12] 田裕鹏, 周克印, 梁华, 等. 缺陷红外检测的定量化分析研究[J]. 仪器仪表学报, 2008, 29(11): 2413-1418.

    Tian Y P, Zhou K Y, Liang H, et al. Research on quantitative evaluation of infrared thermography[J]. Chinese Journal of Scientific Instrument, 2008, 29(11): 2413-1418.

[13] 赵石彬, 张存林, 伍耐明, 等. 红外热波无损检测技术用于聚丙烯管道缺陷的检测[J]. 光学学报, 2010, 30(2): 456-460.

    Zhao S B, Zhang C L, Wu N M, et al. Infrared thermal wave non-destructive inspection for defects of polypropylene pipeline[J]. Acta Optica Sinica, 2010, 30(2): 456-460.

[14] 张学武, 丁燕琼, 闫萍. 一种基于红外成像的强反射金属表面缺陷视觉检测方法[J]. 光学学报, 2011, 31(3): 0312004.

    Zhang X W, Ding Y Q, Yan P. Vision inspection of metal surface defects based on infrared imaging[J]. Acta Optica Sinica, 2011, 31(3): 0312004.

[15] 罗森诺. 传热学基础手册[M]. 北京: 科学出版社, 1992.

    Rohsenow WM. Handbook of heat transfer fundamentals [M]. Beijing: Science Press, 1992.

[16] 华浩然. 红外热成像反射与透射法的缺陷深度定量检测[D]. 南昌: 南昌航空大学, 2015.

    Hua HR. Research on quantitative detection of defect depth through reflection method and transmission method of infrared thermal imaging technology[D]. Nanchang: Nanchang Hangkong University, 2015.

[17] 刘震涛, 潘俊, 尹旭, 等. 感应加热线圈参数对被试件温度场的影响分析[J]. 机电工程, 2015, 32(3): 317-323.

    Liu Z T, Pan J, Yin X, et al. Effects of induction heating coil parameters on temperature field of tested subjects[J]. Journal of Mechanical & Electrical Engineering, 2015, 32(3): 317-323.