[1] 杨宁, 杨帆.激光熔覆工艺参数对熔覆层质量的影响［J］.热处理技术与装备, 2013, 31(4): 17-19.

    YANG N, YANG F.Influence of laser cladding process parameters on cladding layer quality［J］.Heat Treatment Technology and Equipment, 2010, 31(4): 17-19.

[2] 李华玲, 王茂才, 赵吉宾, 等.铝合金Nd:YAG脉冲激光SiC复合化涂层组织特征［J］.中国激光, 2004, 31(6): 765-768.

    LI H, WANG M C, ZHAO J B, et al.Microstructure characteristics of aluminum alloy Nd:YAG pulsed laser SiC composite coating［J］.Chinese Journal of Lasers, 2004, 31(6): 765-768.

[3] 关泰红, 高勃, 吕晓卫, 等.激光快速成形工艺参数对生物陶瓷复合涂层物相组成的影响［J］.中国激光, 2009, 36(10): 2717-2721.

    GUAN T H, GAO B, LV X W, et al.Effects of laser rapid forming process parameters on phase composition of bioceramic composite coatings［J］.Chinese Journal of Lasers, 2009, 36(10): 2717-2721.

[4] 张霜银, 林鑫, 陈静, 等.工艺参数对激光快速成形TC4钛合金组织及成形质量的影响［J］.稀有金属材料与工程, 2007, 36(10): 1839-1843.

    ZHANG S Y, LIN X, CHEN J, et al.Effect of process parameters on microstructure and forming quality of laser rapid forming TC4 titanium alloy［J］.Rare Metal Materials and Engineering, 2007, 36(10): 1839-1843.

[5] 夏仁波, 刘伟军, 王越超.影响激光直接制造金属零件精度的因素及其闭环控制研究进展［J］.机械科学与技术, 2004, 23(9): 1085-1089.

    XIA R B, LIU W J, WANG Y C.Research progress on factors affecting the precision of direct laser manufacturing of metal parts and its closed-loop control［J］.Mechanical Science and Technology for Aerospace Engineering, 2004, 23(9): 1085-1089.

[6] OCELK V, OLIVEIRA U D, BOER M D, et al.Thick Co-based coating on cast iron by side laser cladding: Analysis of processing conditions and coating properties［J］.Surface & Coatings Technology, 2007, 201(12): 5875-5883.

[7] 朱刚贤, 张安峰, 李涤尘.激光熔覆工艺参数对熔覆层表面平整度的影响［J］.中国激光, 2010, 37(1): 296-301.

    ZHU G X, ZHANG A F, LI D C.Effect of laser cladding process parameters on surface smoothness of cladding layer［J］.Chinese Journal of Lasers, 2010, 37(1): 296-301.

[8] KIM J D, PENG Y.Melt pool shape and dilution of laser cladding with wire feeding［J］.Journal of Materials Processing Technology, 2000, 104(3): 284-293.

[9] CHRYSSOLOURIS G, ZANNIS S, TSIRBAS K, et al.An experimental investigation of laser cladding［J］.CIRP Annals-Manufacturing Technology, 2002, 51(1): 145-148.

[10] 常明, 张庆茂, 廖健宏, 等.脉冲Nd:YAG激光熔覆修复塑料模具工艺参数的优化［J］.强激光与粒子束, 2006, 18(9): 1443-1446.

    CHANG M, ZHANG Q M, LIAO J H, et al.Optimization of process parameters of pulsed Nd:YAG laser cladding for plastic mold restoration［J］.High Power Laser and Particle Beams, 2006, 18(9): 1443-1446.

[11] 丁周华, 郑启光, 童杏林, 等.基于神经网络的Co基硬质合金激光熔覆工艺优化［J］.光电子·激光, 2004, 15(3): 352-355.

    DING Z H, ZHENG Q G, TONG X L, et al.Optimization of laser cladding technology for Co-based hard alloy based on neural network［J］.Journal of Optoelectronics·laser, 2004, 15(3): 352-355.

[12] 飞思科技产品研发中心.神经网络理论与 MATLAB7 实现［M］.北京: 电子工业出版社, 2005.

    PHASE ONE TECHNOLOGY R & D CENTER.Neural network theory and MATLAB7 implementation［M］.Beijing: Publishing House of Electronics Industry, 2005.

[13] 周开利, 康耀红.神经网络模型及其 MATLAB 仿真程序设计［M］.北京: 清华大学出版社, 2005.

    ZHOU K L, KANG Y H.Neural network model and MATLAB simulation program design［M］.Beijing: Tsinghua University Press, 2005.

[14] MATLAB中文论坛.MATLAB 神经网络 30 个案例分析［M］.北京: 北京航空航天大学出版社, 2010.

    MATLAB CHINESE FORUM.MATLAB neural network 30 case studies［M］.Beijing: Beijing University of Aeronautics and Astronautics Press, 2010.

[15] LEARDI R.Genetic algorithms in chemistry［J］.Journal of Chromatography A, 2007, 1158(1): 226-233.

[16] 董晓菲, 张冠伟.基于计算机技术45钢激光熔覆工艺的数值模拟［J］.热加工工艺, 2014, 43(2): 13-16.

    DONG X F, ZHANG G W.Numerical simulation of laser cladding process for 45 steel based on computer technology［J］.Thermal Processing, 2014, 43(2): 13-16.