[1] 胡壮麒, 刘丽荣, 金 涛, 等. 镍基单晶高温合金的发展［J］. 航空发动机, 2005, 31(3): 1-7.

    Hu Zhuangqi, Liu Lirong, Jin Tao, et al. Development of the Ni-base single crystal superalloys［J］. Aeroengine, 2005, 31(3): 1-7.

[2] 唐中杰, 郭铁明, 付 迎, 等. 镍基高温合金的研究现状与发展前景［J］. 金属世界, 2014(1): 36-40.

    Tang Zhongjie, Guo Tieming, Fu Ying, et al. Research present situation and the development prospect of nickel-based superalloy［J］. Metal World, 2014(1): 36-40.

[3] Ford T. Single crystal blades［J］. Aircraft Engineering and Aerospace Technology, 1997, 69(6): 564-566.

[4] Arakere N K, Swanson G. Effect of crystal orientation on fatigue failure of single crystal nickel base turbine blade superalloys［J］. Journal of Engineering for Gas Turbines and Power, 2002, 124(1): 161-176.

[5] Kurz W, Bezenon C, Gumann M. Columnar to equiaxed transition in solidification processing［J］. Science and Technology of Advanced Materials, 2001, 2(1): 185-191.

[6] Gumann M, Bezencon C, Canalis P, et al. Single-crystal laser deposition of superalloy: Processing-microstructure maps［J］. Acta Materialia, 2001, 49(6): 1051-1062.

[7] Mokadem S, Bezenon C, Hauert A, et al. Laser repair of superalloy single crystals with varying substrate orientations［J］. Metalllurgical and Materials Transactions A, 2007, 38(7): 1500-1510.

[8] Ardakani M G, D′Souza N, Wagner A, et al. Competitive grain growth and texture evolution during directional solidification of superalloys［A］. The Minerals Metals and Materials Society, 2000.

[9] Yang S, Huang W D, Liu W J, et al. Development of microstructures in laser surface remelting of DD2 single crystal［J］. Acta Materialia, 2002, 50(2): 315-325.

[10] 黄卫东. 激光立体成形［M］. 西安: 西北工业大学出版社, 2007.

    Huang Weidong. Laser solid forming［M］. Xi′an: Northwestern Polytechnical University Press, 2007.

[11] 陈光霞, 曾晓雁. DLF与SLM激光快速成型方法的比较研究［J］. 现代制造工程, 2010(5): 72-75.

    Chen Guangxia, Zeng Xiaoyan. Comparative research on direct laser fabrication and selective laser melting［J］. Modern Manufacturing Engineering, 2005(5): 72-75.

[12] Kempen K, Yasa E, Thijs L, et al. Microstructure and mechanical properties of selective laser melted 18Ni-300 steel［J］. Physics Procedia, 2011, 12: 255-263.

[13] Wang F, Wu X H, Clark D. On direct laser deposited Hastelloy-X: dimension, surface finish, microstructure and mechanical properties［J］. Materials Science and Technology, 2011, 27(1): 344-356.

[14] Jia Q B, Gu D D. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties［J］. Journal of Alloys and Compounds, 2014, 585(6): 713-721.

[15] Carter L N, Wang X, Read N, et al. Process optimisation of selective laser melting using energy density model for nickel based superalloys［J］. Materials Science and Technology, 2016, 32(7): 657-661.

[16] 侯慧鹏, 梁永朝, 何艳丽, 等. 选区激光熔化Hastelloy-X合金组织演变及拉伸性能研究［J］. 中国激光, 2017, 44(2): 0202007.

    Hou Huipeng, Liang Yongchao, He Yanli, et al. Microstructure evolution and tensile properties of Hastelloy-X parts produced by selective laser melting［J］. Chinese J Lasers, 2017, 44(2): 0202007.

[17] 闫岸如, 杨恬恬, 王燕灵, 等. 选区激光熔化不同层厚镍的热特性与机械性能［J］. 中国激光, 2016, 43(2): 0203004.

    Yan Anru, Yang Tiantian, Wang Yanling, et al. Thermal properties and mechanical properties of selective laser melting different layer thicknesses of Ni powder［J］. Chinese J Lasers, 2016, 43(2): 0203004.

[18] 潘爱琼. 选区激光熔化成形SRR99镍基单晶的基础研究［D］. 武汉: 华中科技大学, 2013: 28-29.

    Pan Aiqiong. Study on SRR99 Ni-based single-crystal superalloy by selective laser melting［D］. Wuhan: Huazhong University of Science and Technology, 2013: 28-29.