未知相对位置条件下回转体厚度的双激光检测
李加福, 唐文彦, 张晓琳, 王军. 未知相对位置条件下回转体厚度的双激光检测[J]. 光学 精密工程, 2017, 25(9): 2300.
LI Jia-fu, TANG Wen-yan, ZHANG Xiao-lin, WANG Jun. Thickness measurement of rotary parts with double laser under unknown relative position condition[J]. Optics and Precision Engineering, 2017, 25(9): 2300.
[1] 毛雄忠, 王庆霞, 杨建国, 等. 天线罩法向几何厚度测量方法研究与实现[J]. 机床与液压, 2013, 41(21): 26-28, 43.
MAO X ZH, WANG Q X, YANG J G, et al.. Study and implementation of normal geometric thickness for radome [J]. Machine Tool & Hydraulics, 2013, 41(21): 26-28, 43. (in Chinese)
[2] CONG S, GANG T. Ultrasonic thickness measurement for aluminum alloy irregular surface parts based on spectral analysis [J].Transactions of Nonferrous Metals Society of China, 2012, 22(S2): s323-s328.
[3] 冯俊艳, 冯其波, 匡萃方. 高精度激光三角位移传感器的技术现状[J]. 应用光学, 2004, 25(3): 33-36.
[4] 陈骥, 王鑫, 曹久大, 等. 高速CCD激光位移传感器[J]. 光学 精密工程, 2008, 16(4): 611-616.
[5] 吴頔, 吕且妮, 陈曦, 等. 差分激光三角法油膜厚度测量传感器的测量范围与精度分析[J]. 天津大学学报: 自然科学与工程技术版, 2013, 46(11): 998-1002.
WU D, L Q N, CHEN X, et al.. Analysis on measurement range and precision of the oil Film thickness measurement sensor based on differential laser trigonometry [J]. Journal of Tianjin University: Science and Technology, 2013, 46(11): 998-1002. (in Chinese)
[6] 郭媛, 王娜. 基于CCD的激光非接触式钢板测厚方法研究[J]. 仪表技术与传感器, 2014, (12): 68-70.
GUO Y, WANG N. Study on laser non-contact thickness measurement method for cold-roll steel sheets based on linear CCD [J].Instrument Technique and Sensor, 2014(12): 68-70. (in Chinese)
[7] 陈功, 朱锡芳, 许清泉, 等. 多分辨率小波在非连续涂层测厚的应用[J]. 控制工程, 2013, 20(1): 175-178.
CHEN G, ZHU X F, XU Q Q, et al.. Multi-resolution wavelet in discontinuous coating thickness measurement [J]. Control Engineering of China, 2013, 20(1): 175-178. (in Chinese)
[8] 陈功, 朱锡芳, 许清泉, 等. 未知噪声频率环境下锂电池极片激光测厚研究[J]. 仪器仪表学报, 2015, 36(9): 1978-1986.
CHEN G, ZHU X F, XU Q Q, et al.. Research on electrode film thickness measurement of lithium battery with laser under unknown noise frequency environment [J]. Chinese Journal of Scientific Instrument, 2015, 36(9): 1978-1986. (in Chinese)
[9] 王仲, 苏野, 刘新波, 等. 回转激光位移传感器逼近式孔心定位方法[J]. 中国激光, 2012, 39(6): 0608001.
[10] 王振忠, 陈世平, 王泉金, 等. 砂轮偏心信号的高精度检测方法[J]. 光学 精密工程, 2016, 24(10): 20-27.
WANG ZH ZH, CHEN SH P, WANG Q J, et al.. High accuracy detection algorithm for eccentric signal of grinding wheel [J]. Opt. Precision Eng., 2016, 24(10): 20-27. (in Chinese)
[11] 刘新波, 付鲁华, 王仲, 等. 双激光位移传感器组合测头的光轴共线调校法[J]. 光电子·激光, 2013, 24(7): 1363-1369.
LIU X B, FU L H, WANG ZH, et al.. Optic axis collinear adjustment method for the double laser displacement sensors combination probe [J]. Journal of Optoelectronics·Laser, 2013, 24(7): 1363-1369. (in Chinese)
[12] MARESCA P, GMEZ E, CAJA J, et al.. Use of coordinate measuring machines and digital optical machines for the geometric characterization of circumference arcs using the minimum zone method [J]. Measurement, 2010, 43(6): 822-836.
[13] 沈廷鳌, 涂亚庆, 李明, 等. 基于相关原理的相位差测量改进算法及应用[J]. 振动与冲击, 2014, 33(21): 177-182.
SHEN T A, TU Y Q, LI M, et al.. An improved method for phase difference measurement based on correlation theory [J]. Journal of Vibration and Shock, 2014, 33(21): 177-182. (in Chinese)
李加福, 唐文彦, 张晓琳, 王军. 未知相对位置条件下回转体厚度的双激光检测[J]. 光学 精密工程, 2017, 25(9): 2300. LI Jia-fu, TANG Wen-yan, ZHANG Xiao-lin, WANG Jun. Thickness measurement of rotary parts with double laser under unknown relative position condition[J]. Optics and Precision Engineering, 2017, 25(9): 2300.