光学技术, 2016, 42 (6): 557, 网络出版: 2016-12-23   

一种高稳定性光纤F-P标准具的设计

Design of fiber F-P etalon with high stability
作者单位
1 北京理工大学 光电学院, 北京 100081
2 北京理工大学 激光微纳制造研究所, 北京 100081
3 中自高科(苏州)光电有限公司, 江苏 苏州 215000
摘要
法布里-珀罗(F-P)标准具广泛应用于光纤通信与光纤传感领域。实心标准具受自身材料的限制, 无法满足高稳定性的要求。空气隙标准具采用热膨胀系数极低的垫片, 提高了器件的温度稳定性能。介绍了低温漂光纤F-P标准具的设计和制作, 出射光自由光谱范围为100GHz, 损耗为3dB, 0~70℃温度漂移小于3GHz。相比于采用传统方法制作的标准具, 该光纤F-P标准具稳定性更高, 解决了实心标准具折射率和热膨胀变化大的问题。
Abstract
The Fabry-Perot etalon is widely used in the area of optical fiber communication and optical fiber sensing. A glass gap F-P etalon lacks high stability due to its high coefficient of thermal expansion. Two pieces of glasses with low thermal-expansion coefficient are employed in an air gap etalon to improve high temperature stability.The design and manufacture of the optical fiber F-P etalon is demonstrated.Experimental results show that the FSR(Free Spectral Range) is 100GHz, the loss is 3dB and the temperature drift is less than 3GHz from 0~70℃.Compared with the devices made by traditional methods, the present one is more stable and free of large variation of the refractive index and the thermal expansion.

夏吟秋, 江毅, 李晓炜, 刘达. 一种高稳定性光纤F-P标准具的设计[J]. 光学技术, 2016, 42(6): 557. XIA Yinqiu, JIANG Yi, LI Xiaowei, LIU Da. Design of fiber F-P etalon with high stability[J]. Optical Technique, 2016, 42(6): 557.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!