光电工程, 2016, 43 (12): 99, 网络出版: 2016-12-30   

光学拼接焦平面重叠像元数计算

Calculation of Overlapping Pixels in Focal Plane Based on Optical Butting
作者单位
北京空间机电研究所,北京 100094
摘要
针对光学拼接焦平面的图像漏缝问题,本文提出了一种基于误差分析的CCD 拼接像元数计算方法。首先,基于相机成像原理建立了焦面光学拼接的模型。结合像方远心和非远心光路系统的特点,对导致漏缝的因素进行分析。对反射镜导致渐晕区的传函下降问题,给出了拼接像元数的计算公式?最后,将该方法应用于焦平面实例,结果表明,CCD 拼接不存在漏缝现象?
Abstract
In order to eliminate the imaging gap of focal plane based on optical butting, an error analysis-based algorithm of overlapping pixels was proposed. Firstly, an imaging model for focal plane based on optical butting is established according to the imaging principle of camera. Then, the reason causing imaging gaps is analyzed which combined with telecentric and non-telecentric optical system. Combined with the decrease of MTF in the vignetting distortion caused by the reflector, the formula for computing the numbers of overlapping pixels between adjacent CCDs is obtained. Finally, an example is given. Experimental results show that the proposed algorithm can eliminate the imaging gap.

褚备, 李富强, 常君磊. 光学拼接焦平面重叠像元数计算[J]. 光电工程, 2016, 43(12): 99. CHU Bei, LI Fuqiang, CHANG Junlei. Calculation of Overlapping Pixels in Focal Plane Based on Optical Butting[J]. Opto-Electronic Engineering, 2016, 43(12): 99.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!