红外与毫米波学报, 2016, 35 (6): 652, 网络出版: 2017-01-12  

锑化镓基半导体激光器高效率光束整形

High efficiency beam shaping of GaSb based diode lasers
作者单位
中国科学院长春光学精密机械与物理研究所 发光学及应用国家重点研究室, 吉林 长春 130033
摘要
锑化镓基半导体激光器发光波长为1.8~4 μm, 因为具有体积小、重量轻和电流驱动等优势, 应用范围很广.但是单管激光器并不能提供满足实际应用的激光功率, 因此需要将已经成功应用于近红外半导体激光器的光束合成方法移植到中红外波段.在各种光束合成方法中, 高效率的光束整形都是重要基础.展示了一种采用多只单管半导体器件的高效率光束整形方法, 并在实验中实现了1.94 μm波长1.93 W连续光功率输出, 整形效率高于90%.这个光束整形方法可以用于构建更复杂的光谱或相干光束合成.
Abstract
GaSb-based diode lasers with emitting wavelength of 1.8 ~ 4 μm have a wide range of applications due to advantages of compact in size, light in weight and electric drive. However, single emitter can not provide enough laser power for practical applications. Therefore, methods of beam combination which have been successfully applied to diode lasers in near-infrared band are needed to be transplanted to mid-infrared band. In every method of beam combination, high efficiency beam shaping is basic and principal. A method of high efficiency beam shaping using multiple single diode lasers was demonstrated. A continuous-wave optical power of 1.93 W at wavelength of 1.94 μm with efficiency of higher than 90% was achieved experimentally. This method of beam shaping can be utilized to build spectral or coherent beam combination.

吴昊, 彭航宇, 宁永强, 王立军. 锑化镓基半导体激光器高效率光束整形[J]. 红外与毫米波学报, 2016, 35(6): 652. WU Hao, PENG Hang-Yu, NING Yong-Qiang, WANG Li-Jun. High efficiency beam shaping of GaSb based diode lasers[J]. Journal of Infrared and Millimeter Waves, 2016, 35(6): 652.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!