太赫兹科学与电子信息学报, 2017, 15 (1): 7, 网络出版: 2017-03-31  

基于线性叠加技术的0.38 THz 四倍频器设计

Design of 0.38 THz quadrupler based on linear superposition technique
作者单位
中国电子科技集团公司 第13 研究所,河北 石家庄 050051
摘要
太赫兹倍频器是实现太赫兹源的重要途径之一。基于线性叠加技术,研制了0.38 THz单级无源四倍频单片。采用平面环形巴伦与正交混合网络级联的方式,设计了四路移相功分结构,通过零电长度合成,实现了单级四倍频,同时基波和其他无用谐波得到了很好的抑制。设计中先对无源结构进行三维电磁场仿真,然后与有源部分联合仿真优化,在370~410 GHz 频率范围内,变频损耗小于25 dB。
Abstract
Terahertz frequency doubling technique is a primary way to obtain terahertz signal source with high performance. A 0.38 THz single stage passive Monolithic Microwave Integrated Circuit(MMIC) quadrupler chip is developed by using linear superposition technique. The four-way phase shift power divider is designed by the cascade of planar ring Balun and orthogonal hybrid network, which makes the suppression of fundamental and other useless harmonics. The first procedure in the design is the electromagnetism simulation of passive structure, then the passive structure is combined with the active structure and jointly simulated for optimization. The conversion gain is below -25 dB in the frequency of 370-410 GHz.

王亚冰, 何庆国, 刘亚男, 胡志富. 基于线性叠加技术的0.38 THz 四倍频器设计[J]. 太赫兹科学与电子信息学报, 2017, 15(1): 7. WANG Yabin, HE Qingguo, LIU Yanan, HU Zhifu. Design of 0.38 THz quadrupler based on linear superposition technique[J]. Journal of terahertz science and electronic information technology, 2017, 15(1): 7.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!