激光技术, 2017, 41 (3): 361, 网络出版: 2017-05-09   

硅基片上刻蚀衍射光栅及其平坦化设计

Etching diffraction grating of silicon substrate and design of flatten
作者单位
1 中国科学院 上海微系统与信息技术研究所 信息功能材料国家重点实验室, 上海 200050
2 中国科学院大学, 北京100049
摘要
刻蚀衍射光栅(EDG)作为实现波分复用功能的关键器件, 对于片上光互连的实现至关重要。为了实现1310nm波段通道间隔为20nm的硅基EDG, 采用了基尔霍夫标量衍射理论仿真方法进行理论设计和仿真验证, 通过在闪耀光栅反射面引入布喇格反射光栅来提高反射效率、降低器件插入损耗, 并在入射波导处引入多模干涉耦合器以实现通道频谱平坦化设计。结果表明, 闪耀光栅反射面的反射效率由35%提高到了85%, 1dB带宽达到12nm。这对于提高系统稳定性、增大传输距离和容量、降低系统成本具有显著作用, 能够满足光互连系统的实际应用需求。
Abstract
Etching diffraction grating (EDG), one of the most critical components, can achieve wavelength division multiplex (WDM) function and realize on-chip optical interconnection. In order to realize 4-channel EDG with the wavelength spacing of 20nm at 1310nm wavelength, Kirchhoff scalar diffraction theory was used for theory design and simulation verification. To further improve the reflection efficiency and decrease the insertion loss, Bragg reflection gratings were designed to replace the normal etched facets. Multimode interference (MMI) coupler was also introduced at input waveguide for flat-top frequency response. The simulation results demonstrate the reflection efficiency of grating reflective surface is up to 85% and 1dB bandwidth is up to 12nm. The designed EDG has a significant effect on improving system stability, increasing transmission distance and capacity, and reducing system cost. The design can meet the practical application requirements of optical interconnection system.

陈鑫, 武爱民, 仇超, 黄海阳, 赵瑛璇, 盛振, 李伟, 甘甫烷. 硅基片上刻蚀衍射光栅及其平坦化设计[J]. 激光技术, 2017, 41(3): 361. CHEN Xin, WU Aimin, QIU Chao, HUANG Haiyang, ZHAO Yingxuan, SHENG Zhen, LI Wei, GAN Fuwan. Etching diffraction grating of silicon substrate and design of flatten[J]. Laser Technology, 2017, 41(3): 361.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!