光学技术, 2017, 43 (3): 203, 网络出版: 2017-06-08
基于后向散射模型的蒸汽湿度测量及仿真
Measurement and simulation of steam humidity based on backward scattering model
摘要
为了更加准确地测量出汽轮机末级蒸汽湿度, 为锅炉给水量提供依据, 促进汽轮机内部除湿技术的发展, 采用了后向角散射法的思路设计了湿蒸汽参数测量模型, 并对模型所需物理量进行了详细的计算, 为后向散射法测量蒸汽湿度的研究提供参考。通过对模型进行仿真模拟以及实验研究, 得到了后向散射光光强数据。通过对比仿真模拟数据与实验数据, 验证了该模型的可行性与有效性, 对光散射法测量蒸汽湿度的实验分析以及工程实践具有重要意义。
Abstract
In order to make an easy and precise measurement of the stream turbine humidity at the final stage, to provide basis information for boiler feed water, to promote the development of technology which is steam turbine internal dehumidifying, an elaborate research on the parameter of measurement model of wet steam that adopt method of backward angle scattering to provide the reference to the research of scattering method measuring the steam humidity is made. In the model, the simulation and experimental study are carried out, and the scattered light intensity is obtained. The feasibility and effectiveness of the model are verified by comparing the simulation data with the experimental data. The study is of great significance to the experimental analysis and engineering practice of measuring steam humidity by light scattering method.
黄竹青, 周凌, 黄章俊, 丁涛, 杨颖. 基于后向散射模型的蒸汽湿度测量及仿真[J]. 光学技术, 2017, 43(3): 203. HUANG Zhuqing, ZHOU Ling, HUANG Zhangjun, DING Tao, YANG Ying. Measurement and simulation of steam humidity based on backward scattering model[J]. Optical Technique, 2017, 43(3): 203.