红外, 2017, 38 (6): 41, 网络出版: 2017-07-07  

基于光波元件分析仪的红外探测器S参数校准技术

Research on the S-parameter Calibration Technique of Infrared Detector Based on Lightwave Component Analyzer
作者单位
中国电子科技集团公司第四十一研究所,山东 青岛 266555
摘要
为了消除基于光波元件分析仪的红外探 测器S参数测量中系统误差和电光调制器对测量结果的影响,提出了一种基 于12项误差系数的校准方法。在对电光调制器和红外探测 器的S参数进行建模的基础上,构建了测量系统的数据流图,并推 导出了红外探测器的S参数校准公式。在10 MHz ~ 20 GHz范围 内对红外探测器的S21参数进行了测量。本 文算法所得的数据与经过计量的 N4375D型分析仪所测得的数据的皮尔逊积矩相关系数为0.997。结果表明,数据吻 合良好,进而验证了本文算法的正确性。
Abstract
To remove the influences of system error and electro-optical modulation on the measurement result in the infrared detector S parameter measurement based on a lightwave component analyzer, a calibration method based on 12-term error coefficient is proposed. On the basis of the network modeling of both electro-optical modulation and S parameters of an infrared detector, the DFD of the measurement system is designed. The S parameter correction formula is derived. The S21 parameters of the infrared detector are measured in the range from 10 MHz to 20 GHz. The Pearson Product-moment Correlation Coefficient (PPMCC) between the data obtained by the proposed method and the data measured by using a N4375D-type analyzer is 0.997. The result shows that the data are in good agreement and the validity of the proposed method is verified.

王广彪, 魏石磊, 张志辉, 韩顺利. 基于光波元件分析仪的红外探测器S参数校准技术[J]. 红外, 2017, 38(6): 41. WANG Guang-biao, WEI Shi-lei, ZHANG Zhi-hui, HAN Shun-li. Research on the S-parameter Calibration Technique of Infrared Detector Based on Lightwave Component Analyzer[J]. INFRARED, 2017, 38(6): 41.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!