应用激光, 2017, 37 (4): 475, 网络出版: 2017-10-12   

镍基合金激光熔覆立体成形工艺研究

Study on Solid Forming Process of Ni Based Alloy Laser Cladding
作者单位
中国工程物理研究院材料研究所, 四川 江油 621907
摘要
为了实现块体和圆管的激光熔覆成形, 通过实验研究了扫描速度、激光功率和送粉速率对Ni25粉末单熔覆层的高度和宽度的影响规律, 建立了熔覆层高度和宽度分别与扫描速度、激光功率和送粉速率之间的对应关系。在此基础上, 根据对应关系, 选择优化的成形参数(扫描速度6 mm/s, 激光功率900 W, 送分速率0.1 rpm), 配合搭接率的计算(30%)和成形路径设计, 使用多层多道激光熔覆成形技术实现了块体和圆管的成形。使用扫描电子显微镜分析成形件的内部组织结构, 结果表明成形件内部组织致密, 成分均匀, 晶粒尺寸分布在18 μm左右范围内。
Abstract
In order to obtain block and tube made from laser cladding rapid manufacturing (LCRM), the effects of scanning speed, laser power and powder feeding rate on Ni25 cladding layer height and width are studied by conducting single-layer LCRM experiments. Relations between sizes of cladding layers and forming parameters are established by data analysis. Based on these relations, Ni25 block and tube are produced from milti-layer-multi-channel LCRM, with the help of parameters optimizing, overlap rate calculating and scanning path designing. Scanning electronic microscope (SEM) analysis shows that LCRM workpieces with compact microstructure, homogeneous composition and around 18 μm grain size distribution.

王述钢, 杨帆, 杨磊. 镍基合金激光熔覆立体成形工艺研究[J]. 应用激光, 2017, 37(4): 475. Wang Shugang, Yang Fan, Yang Lei. Study on Solid Forming Process of Ni Based Alloy Laser Cladding[J]. APPLIED LASER, 2017, 37(4): 475.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!