中国激光, 2017, 44 (12): 1202006, 网络出版: 2017-12-11   

激光焊接参数对有机玻璃与不锈钢接头力学性能的影响

Influences of Laser Welding Parameters on Mechanical Properties of Polymethyl Methacrylate and Stainless-Steel Joints
作者单位
广东工业大学机电工程学院, 广东 广州 510006
摘要
通过对有机玻璃与304不锈钢进行异种材料的搭接焊试验, 研究了焊接过程中出现的物理现象及焊接缺陷。利用正交试验得到了优化的工艺参数组合, 并获得了成形良好的焊接接头。分析了工艺参数对剪切应力的影响。研究结果表明, 激光焊接速度、脉冲宽度、光斑大小和脉冲频率对剪切应力具有较大影响, 焊接接头的最大剪切力为191 N·mm-2。焊接缺陷和能量密度是导致焊接接头失效的主要因素。
Abstract
By the experiment of the overlap welding of dissimilar materials for the polymethyl methacrylate and 304 stainless steels, the physical phenomena and weld defects during the welding process are analyzed. By the orthogonal tests, the optimized process parameter combination is obtained, and the well-formed weld joints are realized. The influences of the process parameters on the shear stress are analyzed. The study results show that the influences of laser welding speed, pulse width, spot size and pulse frequency on the shear stress are strong, and the maximum shear force of weld joints is 191 N·mm-2. The key factors determining the failure of weld joints are weld defects and energy densities.

黄怡洁, 高向东, 林少铎. 激光焊接参数对有机玻璃与不锈钢接头力学性能的影响[J]. 中国激光, 2017, 44(12): 1202006. Huang Yijie, Gao Xiangdong, Lin Shaoduo. Influences of Laser Welding Parameters on Mechanical Properties of Polymethyl Methacrylate and Stainless-Steel Joints[J]. Chinese Journal of Lasers, 2017, 44(12): 1202006.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!