激光与光电子学进展, 2017, 54 (12): 121207, 网络出版: 2017-12-11   

基于两路激光实时跟踪的机床刀具位姿误差测量 下载: 545次

Pose Error Measurement Based on Two Path Lasers Real-Time Tracking of Machine Tool
殷建 *
作者单位
铜陵学院机械工程学院, 光电子应用安徽省工程技术研究中心, 安徽 铜陵 244061
摘要
在动态状况下, 实时获取机床刀具的位姿误差是提高机床精度的关键因素之一。机床多轴联动时, 利用两路激光实时跟踪测量主轴测量杆上两测点的空间运动轨迹, 得到两测点三维数据, 并拟合出两个空间圆, 用两圆的圆心连线来计算刀具的方向和位置误差。机床加工时, 变化的工艺参数引起的动态运动误差和热误差变化会造成沿Z轴方向运动的滑枕误差实时变化, 变化的滑枕误差会影响刀具的最终位置方向。通过自适应卡尔曼滤波预测算法对滑枕误差值进行预测-测量-修正, 将计算得到的误差最优估计值替换误差补偿模型中原有的误差参数, 进而对刀具位姿进行误差修正。最后,对圆锥台试件以及一个S型工件进行有误差修正补偿和未补偿加工, 由测得工件的精度对比可知, 采用的刀具位姿误差实时测量方法及自适应修正补偿可更加有效地提高五轴机床的加工精度。
Abstract
At dynamic situation, acquiring the dynamic pose error of machine tools in real time is one of the key factors to improve the accuracy of machine tool. For multi-axis machine tool, two path lasers are used to track the space motion trajectory of two measuring points on the main-spindle measuring rod in real time. Two measuring points of 3D data are obtained and two space circles are fitted out. Then the line connecting the centre of two circles is used to identify the direction and position error of the tool. As the real-time ram errors moving along Z-axis changes with the change of the thermal error and dynamic motion error caused by the change of parameters, and the ram errors affect the final position of the tool direction. The ram errors should be predicted, measured, and corrected with the adaptive Kalman filter algorithm. The original error parameters in the error compensation model are replaced by the calculated optimal estimation value to correct the pose error of the tool. Finally, the error correction compensation and the uncompensated process are applied for the frustum specimen and the S-type workpiece. The comparison of the accuracy of the measured workpiece shows that the real-time measuring method of the tool position error and the adaptive correction compensation can effectively increase the processing accuracy of five-axis machine.

殷建. 基于两路激光实时跟踪的机床刀具位姿误差测量[J]. 激光与光电子学进展, 2017, 54(12): 121207. Yin Jian. Pose Error Measurement Based on Two Path Lasers Real-Time Tracking of Machine Tool[J]. Laser & Optoelectronics Progress, 2017, 54(12): 121207.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!