半导体光电, 2017, 38 (6): 788, 网络出版: 2017-12-25   

F-P腔式光纤MEMS压力传感器的设计

Design of An Optical Fiber MEMS Pressure Sensor Based on F-P Cavity
葛益娴 1,2,3,*赵伟绩 3张鹏 3
作者单位
1 南京信息工程大学 江苏省大气环境与装备技术协同创新中心, 南京 210044
2 南京信息工程大学 江苏省气象探测与信息处理重点实验室, 南京 210044
3 南京信息工程大学 电子与信息工程学院, 南京 210044
摘要
提出了一种新型结构的法布里-珀罗(F-P)腔光纤压力传感器。该传感器基于法布里-珀罗多光束干涉, 利用压力敏感膜的纵向挠度变化带动位移柱的横向位移运动来改变F-P腔的腔长变化。详细阐述了传感器新结构的设计方法及其工作原理, 分析了不同参数对传感器性能的影响。采用ANSYS软件仿真模拟了传感器压力敏感膜在压力作用下的挠度变化。结合现有的MEMS工艺, 可制作出工艺简单、温度系数低、灵敏度高, 且抗电磁干扰的MEMS光纤压力传感器。
Abstract
A novel structure of F-P cavity optical fiber pressure sensor was proposed. Based on Fabry-Perot interference, the sensor uses the longitudinal deflection of the pressure sensitive membrane to drive the lateral displacement of the displacement column to change the cavity length. The design method of the sensor and its working principle were described in detail, and the influence of different parameters on the sensor performance was analyzed. The deflection of the pressure sensitive diaphragm under pressure was simulated by ANSYS software. Combined with the existing MEMS technology, MEMS fiber pressure sensors with the characteristics of simple process, low temperature coefficient, high sensitivity and anti-electromagnetic interference can be produced.

葛益娴, 赵伟绩, 张鹏. F-P腔式光纤MEMS压力传感器的设计[J]. 半导体光电, 2017, 38(6): 788. GE Yixian, ZHAO Weiji, ZHANG Peng. Design of An Optical Fiber MEMS Pressure Sensor Based on F-P Cavity[J]. Semiconductor Optoelectronics, 2017, 38(6): 788.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!