首页 > 论文 > Photonic Sensors > 7卷 > 4期(pp:294-304)

Review on Pressure Sensors for Structural Health Monitoring

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

Abstract

This paper reports the state of art in a variety of pressure and the detailed study of various matrix based pressure sensors. The performances of the bridges, buildings, etc. are threatened by earthquakes, material degradations, and other environmental effects. Structural health monitoring (SHM) is crucial to protect the people and also for assets planning. This study is a contribution in developing the knowledge about self-sensing smart materials and structures for the construction industry. It deals with the study of self-sensing as well as mechanical and electrical properties of different matrices based on pressure sensors. The relationships among the compression, tensile strain, and crack length with electrical resistance change are also reviewed.

投稿润色
补充资料

DOI:10.1007/s13320-017-0419-z

所属栏目:Review

基金项目:S. Sikarwar is thankful to Department of Science and Technology, Government of India for financial support in the form of INSPIRE AORC fellowship Grant No. DST/INSPIRE Fellowship/2014/ IF140317, India.

收稿日期:2017-03-30

修改稿日期:2017-05-28

网络出版日期:--

作者单位    点击查看

Samiksha SIKARWAR:Department of Applied Physics, Babasaheb Bhimrao Ambedkar University, Lucknow, 226025, India
Satyendra:Department of Applied Physics, Babasaheb Bhimrao Ambedkar University, Lucknow, 226025, India
Shakti SINGH:Department of Applied Physics, Babasaheb Bhimrao Ambedkar University, Lucknow, 226025, India
Bal Chandra YADAV:Department of Applied Physics, Babasaheb Bhimrao Ambedkar University, Lucknow, 226025, India

联系人作者:Bal Chandra YADAV(balchandra_yadav@rediffmail.com)

【1】S. H. Wen and D. D. L. Chung, “Piezoresistivity in continuous carbon fiber cement-matrix composite,” Cement and Concrete Research, 1999, 29(3): 445–449.

【2】D. D. L. Chung, “Functional properties of cement-matrix composites,” Journal of Materials Science, 2001, 36(6): 1315–1324.

【3】V. C. Li, “Interface tailoring for strain-hardening PVA-ECC,” Aci Materials Journal, 2002, 99(5): 463?472.

【4】Federal Reserve Bank of Minneapolis Community Development Project. Available online: https://en.wikipedia.org/wiki/Tacoma_Narrows_Bri dge (1940).

【5】B. G. Han, B. Z. Han, and J. P. Ou, “Novel piezoresistive composite with high sensitivity to stress/strain,” Materials Science & Technology, 2013, 26(7): 865?870.

【6】P. W. Chen and D. D. L. Chung, “Low-drying-shrinkage concrete containing carbon fibres,” Composites Part B-Engineering, 1996, 27(3?4): 269?274.

【7】X. L. Fu and D. D. L. Chung, “Self-monitoring of fatigue damage in carbon fiber reinforced cement,” Cement & Concrete Research, 1996, 26(1): 15?20.

【8】S. Ikai, J. R. Reichert, A. V. Rodrigues, and V. A. Zampieri, “Asbestos-free technology with new high toughness polypropylene (PP) fibers in air-cured Hatschek process,” Construction & Building Materials, 2010, 24(2): 171?180.

【9】J. K. Dong, A. E. Naaman, and S. El-Tawil, “Comparative flexural behavior of four-fiber reinforced cementitious composites,” Cement & Concrete Composites, 2008, 30(10): 917?928.

【10】A. V. Carazo, “Novel piezoelectric transducers for high voltage measurements,” Universitat Politècnica de Catalunya, 2000, 242.

【11】G. Gautschi, Piezoelectric sensorics. Heidelberg: Springer Berlin, 2002.

【12】P. C. Chang, A. Flatau, and S. C. Liu, “Review paper: health monitoring of civil infrastructure,” Structural Health Monitoring, 2003, 2(3): 257?267.

【13】M. M. Samman and M. Biswas, “Vibration testing for nondestructive evaluation of bridges II: results,” Journal of Structural Engineering, 1994, 120(1): 290?306.

【14】S. Wen, S. Wang, and D. D. L. Chung, “Piezoresistivity in continuous carbon fiber polymer-matrix and cement-matrix composites,” Journal of Material Science, 2000, 35(14): 3669?3676.

【15】H. Sohn, “Effects of environmental and operational variability on structural health monitoring,” Philosophical Transactions, 2007, 365(1851): 539?560.

【16】P. C. Chang, A. Flatau, and S. C. Liu, “Review paper: health monitoring of civil infrastructure,” Structural Health Monitoring, 2003, 2(3): 257?267.

【17】W. J. Staszewski and A. N. Robertson, “Time-frequency and time-scale analysis for structural health monitoring,” Philosophical Transactions, 365(1851): 449–477.

【18】A. Peled, E. Zaguri, and G. Marom, “Bonding characteristics of multifilament polymer yarns and cement matrices,” Composites Part A-Applied Science & Manufacturing, 2008, 39(6): 930–939.

【19】S. Singh, A. Shukla, and R. Brown, “Pull out behaviour of polypropylene fibers from the cementitious matrix,” Cement & Concrete Research, 2004, 34(10): 1919–1925.

【20】A. Bentur, “Role of interfaces in controlling durability of fiber-reinforced cements,” Journal of Materials in Civil Engineering, 2000, 12(1): 2?7.

【21】C. J. Wang, M. Kaya, P. Sahay, H. Alali, and R. Reese, “Fiber optic sensors and sensor networks using a time-domain sensing scheme,” Optics & Photonics Journal, 2013, 3(2B): 236?239.

【22】N. K. Pandey and B. C. Yadav, “Embedded fibre optic microbend sensor for measurement of high pressure and crack detection,” Sensors & Actuators A–Physical, 2006, 128(1): 33–36.

【23】N. K. Pandey and B. C. Yadav, “Fiber optic pressure sensor and monitoring of structural defects,” Optica Applicata, 2007, XXXVII: 57?63.

【24】N. K. Pandey, B. C. Yadav, and A. Tripathi, “Monitoring of high pressure with fiber optic sensor,” Sensors & Transducers, 2006, 74(12): 834?834.

【25】B. Felekoglu, K. Tosun, and B. Baradan, “A comparative study on the flexural performance of plasma treated polypropylene fiber reinforced cementitious composites,” Journal of Materials Processing Technology, 2009, 209(11): 5133–5144.

【26】P. W. Chen and D. D. L. Chung, “Carbon fiber reinforced concrete as an intrinsically smart concrete for damage assessment during dynamic loading,” Journal of the American Ceramic Society, 1995, 78(3): 816?818.

【27】H. R. Pakravan, M. Jamshidi, M. Latifi, and F. Pachecotorgal, “Cementitious composites reinforced with polypropylene, nylon and polyacrylonitrile fibres,” Materials Science Forum, 2012, 730?732: 271?276.

【28】X. L. Fu, W. M. Lu, and D. D. L. Chung, “Improving the strain sensing ability of carbon fiber reinforced cement by ozone treatment of the fibers,” Cement & Concrete Research, 1998, 28(2): 183?187.

【29】X. L. Fu, W. M. Lu, and D. D. L. Chung, “Ozone treatment of carbon fiber for reinforcing cement,” Carbon, 1998, 36(9): 1337–1345.

【30】X. L. Fu and D. D. L Chung, “Self-monitoring of fatigue damage in carbon fiber reinforced cement,” Cement & Concrete Research, 1996, 26(1): 15?20.

【31】S. Wen and D. D. L. Chung, “Piezoresistivity in continuous carbon fiber cement-matrix composite,” Cement & Concrete Research, 1999, 29(3): 445?449.

【32】D. C. Montgomery, Introduction to statistical quality control. New York: John Wiley & Sons, 1996: 108?109.

【33】G. Park and D. J. Inman, “Structural health monitoring using piezoelectric impedance measurements,” Philosophical Transactions of The Royal Society A Mathematical Physical and Engineering Sciences, 2007, 365(1851): 373–392.

【34】R. B. Randall, “State of the art in monitoring rotating machinery-part 1,” Sound & Vibration, 2004, 38(3): 14–21.

【35】Available online: http://www.lindberg-lund.com/ Files/PDF%20Kataloger/Lim/Konstruksjonslim/Dat ablad/Araldite%202033.pdf.

【36】K. A. Soudki, M. F. Green, and F. D. Clapp, “Transfer length of carbon fiber rods in precast pretensioned concrete beams,” Pci Journal, 1997, 42(5): 78–87.

【37】N. Banthia, “Carbon fiber reinforced cements: structure, performance, applications and research needs,” American Concrete Institute, 1994, 142(SP-142ACI): 91?120.

【38】Q. J. Zheng and D. D. L. Chung, “Carbon fiber reinforced cement composites improved by using chemical agents,” Cement & Concrete Research, 1989, 19(1): 25–41.

【39】K. Saito, N. Kawamura, and Y. Kogo, “Development of carbon fiber reinforced cement,” in 21st International SAMPE Technical Conference, Atlantic City, NJ, USA, 1989, pp. 796–802.

【40】H. Kolsch, “Carbon fiber cement matrix (CFCM) overlay system for masonry strengthening,” Journal of Composites for Construction, 1998, 2(2): 105–109.

【41】T. Uomoto, “Concrete composites in the construction field,” Advanced Composite Materials, 1995, 4(3): 261–269.

【42】A. Pivacek, G. J. Haupt, and B. Mobasher, “Cement based cross-ply laminates,” Advanced Cement Based Materials, 1997, 6(3–4): 144–152.

【43】P. W. Chen and D. D. L. Chung, “Carbon fiber reinforced concrete as a smart material capable of non-destructive flaw detection,” Smart Materials, 1993, 2(1): 22–30.

【44】S. Sikarwar and B. C. Yadav, “Opto-electronic humidity sensor: a review,” Sensors & Actuators A-Physical, 2015, 233: 54–70.

【45】X. Huang and D. C. Zhang, “A high sensitivity and high linearity pressure sensor based on a peninsula-structured diaphragm for low-pressure ranges,” Sensors & Actuators A–Physical, 2014, 216(1): 176–189.

【46】R. Sur, K. Sun, J. B. Jeffries, J. G. Socha, and R. K. Hanson, “Scanned-wavelength-modulation- spectroscopy sensor for CO, CO2, CH4 and H2O in a high-pressure engineering-scale transport-reactor coal gasifier,” Fuel, 2015, 150: 102–111.

【47】H. Schmid-Engela, S. Uhliga, U. Wernerc, and G. Schultesa, “Strain sensitive Pt-SiO2 nano-cermet thin films for high-temperature pressure and force sensors,” Sensors & Actuators A–Physical, 2014, 206(1): 17–21.

【48】A. D. Sundararajan and S. M. Rezaul Hasan, “Release etching and characterization of MEMS capacitive pressure sensors integrated on a standard 8-metal 130 nm CMOS process,” Sensors & Actuators A–Physical, 2014, 212(1): 68–79.

【49】J. Y. Cheng, M. Sundholm, B. Zhou, M. Hirsch, and P. Lukowicz, “Smart-surface: large scale textile pressure sensors arrays for activity recognition,” Pervasive & Mobile Computing, 2016, 30: 97–112.

【50】A. P. Dabrowski and L. J. Golonka, “High-pressure sensor with PZT transducer in LTCC package,” Procedia Engineering, 2014, 87: 1099–1102.

【51】J. Wang, C. Zhao, G. H. Zhao, X. F. Jin, S. M. Zhang, and J. B. Zou, “All-quartz high accuracy MEMS pressure sensor based on double-ended tuning fork resonator,” Procedia Engineering, 2015, 120: 857–860.

【52】A. Arogbonlo, C. Usma, A. Z. Kouzani, and I. Gibson, “Design and fabrication of a capacitance based wearable pressure sensor using e-textiles,” Procedia Technology, 2015, 20: 270–275.

【53】M. Prasad, V. Sahula, and V. K. Khanna, “Design and fabrication of Si-diaphragm, ZnO piezoelectric film-based MEMS acoustic sensor using SOI wafers,” IEEE Transactions on Semiconductor Manufacturing, 2013, 26(2): 233–241.

【54】E. Teomete, “Measurement of crack length sensitivity and strain gage factor of carbon fiber reinforced cement matrix composites,” Measurement, 2015, 74: 21?30.

引用该论文

Samiksha SIKARWAR,Satyendra,Shakti SINGH,Bal Chandra YADAV. Review on Pressure Sensors for Structural Health Monitoring[J]. Photonic Sensors, 2017, 7(4): 294-304

Samiksha SIKARWAR,Satyendra,Shakti SINGH,Bal Chandra YADAV. Review on Pressure Sensors for Structural Health Monitoring[J]. Photonic Sensors, 2017, 7(4): 294-304

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF