红外与激光工程, 2018, 47 (1): 0117003, 网络出版: 2018-01-30   

衍射光学元件斜入射衍射效率的测量

Measurement of diffraction efficiency for diffractive optical elements with oblique incidence
作者单位
盐城师范学院 新能源与电子工程学院, 江苏 盐城 224051
摘要
针对衍射光学元件衍射效率测量的双光路实验装置, 当次级衍射光通过孔径光阑由探测器接收时, 为保证测量精度提出了测量衍射效率的修正公式。针对所研制的含有衍射光学元件的折衍射混合成像光学系统, 选取可见光波段中的3个激光波长, 当衍射面上入射角度为12°时对该衍射光学元件进行了衍射效率的测量, 并对测量结果进行了模拟和分析。由于存在一定的加工误差和斜入射时遮挡效应的影响, 实际测得的衍射光学元件的衍射效率比理论计算结果低。根据测量结果拟合曲线, 在473~632.8 nm波段范围内的带宽积分平均衍射效率对比理论值存在12.84%的偏差。
Abstract
Based on the double light-path experiment device measuring for diffraction efficiency of diffractive optical elements(DOEs), a correcting formula of diffraction efficiency was introduced to ensure the measurement accuracy of diffraction efficiency when light of secondary order diffraction was received by the detector after passing through the pinhole aperture. The diffraction efficiency of the designed hybrid refractive-diffractive optical system was measured at three laser wavelengths over the visible waveband for the incident angle upon microstructure surface was 12°. The measurement results were simulated and analyzed. Due to some manufacturing errors and blocking effect, the measured diffraction efficiency was smaller than the theoretical. Based on the fitted curve of measurement results, the deviation of the polychromatic integral diffraction efficiency from the theoretical value was 12.84% over the 473-632.8 nm waveband.

杨亮亮. 衍射光学元件斜入射衍射效率的测量[J]. 红外与激光工程, 2018, 47(1): 0117003. Yang Liangliang. Measurement of diffraction efficiency for diffractive optical elements with oblique incidence[J]. Infrared and Laser Engineering, 2018, 47(1): 0117003.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!