红外技术, 2018, 40 (4): 327, 网络出版: 2018-06-09  

红外周期性吸波结构的设计

Design of an Infrared Periodic Absorbent Structure
作者单位
1 空军工程大学理学院,陕西 西安 710051
2 中国人民解放军93108 部队,黑龙江 齐齐哈尔 114001
摘要
为设计红外周期性吸波结构,本文分析了周期性吸波结构的谐振单元尺寸、介质层厚度和介电常数对吸波效果的影响,研究周期性吸波结构的吸收规律,设计了一种由两种不同尺寸圆形贴片构成的周期性结构,仿真结果表明该结构在SO2 气体探测器的两个特征吸收波长4.0 μm 和7.35 μm 处吸收率分别达到99.67%和99.97%,并且该结构对极化方向不敏感,吸波效果良好。
Abstract
In order to design an infrared periodic absorbent structure, this paper explored the absorption regularity of a periodic absorbent structure. This was achieved through analyzing the effect of the geometric parameters of resonant units and thickness and permittivity of dielectric layers on absorption properties. A periodic absorbent structure composed of circular patches with different radii was designed. Simulation results reveal that the structure was insensitive to polarization and that absorption levels reached 99.67% and 99.97% at thicknesses of 4.0 μm and 7.35 μm respectively. The absorption levels were found to correspond to two distinct characteristic wavelengths when analyzed through a SO2 detector.

车志新, 田昌会, 陈晓莉, 王斌科, 韩文亮. 红外周期性吸波结构的设计[J]. 红外技术, 2018, 40(4): 327. CHE Zhixin, TIAN Changhui, CHEN Xiaoli, WANG Binke, HAN Wenliang. Design of an Infrared Periodic Absorbent Structure[J]. Infrared Technology, 2018, 40(4): 327.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!