太赫兹科学与电子信息学报, 2018, 16 (2): 2180223, 网络出版: 2018-06-09  

基于太赫兹技术的熔融沉积 3D打印误差分析

Terahertz dependent error analysis of 3D printing based on Fused Deposition Modeling
作者单位
中国石油大学理学院, 北京 102249
摘要
熔融沉积 (FDM)技术是目前市售 3D打印机应用最广泛的材料成型技术, 基于这一技术的 3D打印机精确度评价与打印试件的误差分析还没有十分完善的标准化方法。 FDM 3D打印常用的聚合物材料在太赫兹波段存在明显吸收。基于太赫兹时域光谱(THz-TDS), 通过缝隙注水的方式放大试件非实体部分的太赫兹响应, 使得太赫兹技术可同时监测 3D打印试件实体部分与非实体部分的打印精确度。通过分析试件的太赫兹光谱, 能够分辨与原始设计相差 0.96%的微米级误差, 补充了 3D打印误差的分析方法。
Abstract
Fused Deposition Modeling(FDM) is a most widely applied material forming technology for 3D printer. Nevertheless, there is no standardized method for error analysis of 3D printing based on FDM. Polymer materials commonly used in FDM has a strong absorption in terahertz range. Using the method of injecting water into the apertures of specimens, error analysis of both the physical area and non-physical area of specimens is successfully realized by Terahertz Time Domain Spectroscopy(THz-TDS). Based on the analysis of terahertz spectrum, the micron error of 0.96% is able to be observed.

管丽梅, 苗昕扬, 詹洪磊, 赵昆. 基于太赫兹技术的熔融沉积 3D打印误差分析[J]. 太赫兹科学与电子信息学报, 2018, 16(2): 2180223. GUAN Limei, MIAO Xinyang, ZHAN Honglei, ZHAO Kun. Terahertz dependent error analysis of 3D printing based on Fused Deposition Modeling[J]. Journal of terahertz science and electronic information technology, 2018, 16(2): 2180223.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!