应用光学, 2018, 39 (4): 590, 网络出版: 2018-07-30   

基于累加平均的分布式光纤拉曼测温系统

Distributed fiber Raman temperature measurement system based on cumulative average
作者单位
南昌航空大学 省光电检测技术工程实验室,江西 南昌 330063
摘要
分布式光纤拉曼温度传感(DTS)系统是一套基于光纤中的拉曼散射效应来实现分布式温度监控的系统,利用光纤中拉曼散射光的强度与光纤的温度状态有关的原理对温度进行实时监测。设计了一套9 km的光纤拉曼测温系统,利用数据采集卡对斯托克斯和反斯托克斯光进行采集,在电脑端对温度进行累加平均处理,将微弱的信号从系统的噪声中提取出来,提高其信噪比。在累加平均16 000次的情况下测温精度达到了±2℃。
Abstract
Distributed optical fiber Raman temperature sensor (DTS) system is a set of measuring principle of Raman scattering light in optical fiber, based on the distributed temperature monitoring system, which uses Raman scattering light in optical fiber temperature and fiber strength state related principle for real-time monitoring of temperature. A set of 9 km optical fiber Raman temperature measurement system was designed, the Stokes and the anti-Stokes light was collected by data acquisition card, the temperature was accumulated and averaged at the computer terminal,and the weak signal was extracted from the system noise to increase its signal-to-noise ratio.With accumulative average of 16 000 times, the accuracy of temperature measurement can reach to ±2℃.

陈瑞麟, 万生鹏, 贾鹏, 唐晨飞. 基于累加平均的分布式光纤拉曼测温系统[J]. 应用光学, 2018, 39(4): 590. Chen Ruilin, Wan Shengpeng, Jia Peng, Tang Chenfei. Distributed fiber Raman temperature measurement system based on cumulative average[J]. Journal of Applied Optics, 2018, 39(4): 590.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!