强激光与粒子束, 2018, 30 (9): 095004, 网络出版: 2018-08-21  

一体化D-dot探头在传输线电压测量中的设计和应用

Design and performance of integrative D-dot monitor for transmission line voltage measurement
作者单位
中国工程物理研究院 应用电子学研究所, 高功率微波技术重点实验室, 四川 绵阳 621900
摘要
设计一种一体化D-dot探头开展脉冲功率装置中传输线高电压测量工作。D-dot探头安装在传输线外筒上,主要由基座、密封电缆头、探头外壳、绝缘层、信号电极和连接杆构成。采用同轴螺纹连接及限位结构将探头各部件形成一个整体,实现结构的紧凑性和拆装过程的完整性。利用密封BNC探头和无氧铜密封圈实现良好的密封性能,同时减小探头的弹性余量保证测量的准确性。设计了较小的探头对地电容,从而获得良好的高频响应。采用OrCAD/Pspice开展电路模拟,结果显示设计的探头满足信噪比和前沿响应要求。采用CST开展静电场模拟,结果显示设计的D-dot探头可以满足1 MV传输线电压下的绝缘要求。标定和实验结果表明该探头可以响应前沿为几十ns的信号,能够满足测量需要。
Abstract
An integrative D-dot monitor is designed to measure high voltage pulse in transmission line. The monitor which consists of base, airproof BNC connector, probe shell, insulation, probe and connecting rod is located on the outshell of transmission line. Monitor assemblies are coaxially connected by thread, resulting in compaction of configuration and integrality in dismounting or mounting. An airproof BNC connector and a seal packing ring of oxygen-free copper are used to get good sealing performance and veracity, meanwhile their low elasticity leads to high accuracy of measurement. Low ground capacitance of monitor is designed to get good high-frequency response. Simulation by OrCAD/Pspice is taken, with good signal-to-noise ratio and rising time. Results of simulation on electrostatic field by CST show that the monitor is safe to measure 1 MV high voltage. Results of calibration and experiment show that the integrative D-dot monitor can response to signals with rise time of several tens of nanoseconds, which could fulfill our diagnostic requirement.

李春霞. 一体化D-dot探头在传输线电压测量中的设计和应用[J]. 强激光与粒子束, 2018, 30(9): 095004. Li Chunxia. Design and performance of integrative D-dot monitor for transmission line voltage measurement[J]. High Power Laser and Particle Beams, 2018, 30(9): 095004.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!