强激光与粒子束, 2018, 30 (9): 096006, 网络出版: 2018-08-21  

双层并联碲锌镉探测器制备及性能测试

Fabrication and performance test of double-layered parallel CdZnTe detector
作者单位
西南科技大学 核废物与环境安全国防重点学科实验室, 四川 绵阳 621010
摘要
实验采用并联方法制备了叠层(双层)碲锌镉探测器,并利用241Am@59.54 keV和57Co@122 keV γ射线源测试了其γ能谱特性。相比单层探测器,对于较高能量的57Co@122 keV γ射线,叠层碲锌镉探测器表现出较高的探测效率和光峰值效率,较好地改善了康普顿连续统一体。叠层CZT探测器较之单层探测器,能谱分辨率发生轻微恶化。实验初步表明,通过并联叠加方法制备叠层碲锌镉探测器是可行的,并可推断制备更大厚度的叠层探测器将有利于中高能γ射线能谱测量。
Abstract
A stacked (double-layered) CdZnTe detector was fabricated experimentally by parallel method and its gamma spectrum characteristics was tested using 241Am@59.54 keV and 57Co@122 keV gamma ray sources. Compared with a single-layered detector, for the higher energy gamma rays of 57Co@122 keV, the stacked CdZnTe detector exhibited higher detection efficiency and light peak efficiency, and improved the Compton continuum. The energy spectrum resolution of the stacked CdZnTe detector was slightly worse than that of the single-layered detector. The preliminary experimental results show that it is feasible to prepare a stacked CdZnTe detector by parallel method, and it can be inferred that preparation of stacked CdZnTe detectors of larger thickness will be beneficial for mid-high-energy gamma ray spectrometry.

席发元, 宋凤军. 双层并联碲锌镉探测器制备及性能测试[J]. 强激光与粒子束, 2018, 30(9): 096006. Xi Fayuan, Song Fengjun. Fabrication and performance test of double-layered parallel CdZnTe detector[J]. High Power Laser and Particle Beams, 2018, 30(9): 096006.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!