应用激光, 2018, 38 (4): 587, 网络出版: 2018-10-06   

半导体-光纤激光复合焊接铝合金研究

Research on Hybrid Diode-fiber Laser Welding for Aluminum Alloy
作者单位
大族激光科技产业集团股份有限公司, 广东 深圳 518052
摘要
采用915 nm的半导体激光与1 070 nm的单模光纤激光复合焊接3003铝合金, 研究发现当热传导机制占主导作用时, 可以改善熔池的流动状态, 有利于内部气泡的上浮, 获得良好的焊缝成形。复合焊后焊缝较单一光源的焊缝熔深、熔宽要大。通过改变半导体与光纤激光热输入的不同能量配比, 可获得四种焊缝截面形貌, 并对焊缝形成机理进行了详细分析。
Abstract
Hybrid laser was used to weld 3003 aluminum alloy, which is formed of 915 nm diode laser and 1 070 nm single-mode fiber laser. It was found that when the heat conduction mechanism dominates, the flow of the molten pool can be improved, and the internal bubbles can be floated to obtain good weld formation. After the composite welding, the weld depth and width were larger than the single light source. By changing the different energy ratios of diode and fiber laser heat input, four kinds of weld cross-section morphology can be obtained. And the weld formation mechanism was analyzed in detail.

朱宝华, 李小婷, 丁凯强. 半导体-光纤激光复合焊接铝合金研究[J]. 应用激光, 2018, 38(4): 587. Zhu Baohua, Li Xiaoting, Ding Kaiqiang. Research on Hybrid Diode-fiber Laser Welding for Aluminum Alloy[J]. APPLIED LASER, 2018, 38(4): 587.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!