半导体光电, 2018, 39 (5): 640, 网络出版: 2019-01-10  

基于误码统计的边沿触发器建立时间测量方法

Measurement Method for Setup Time of Edge Triggered Flip Flops Based on Bit Error Statistics
作者单位
1 中国空间技术研究院 通信卫星事业部, 北京 100094
2 四川大学 电子信息学院, 成都 610064
摘要
建立时间是边沿触发器的一个重要技术参数, 在设计跨时钟域电路和高速数字电路时起着关键性的作用。介绍了一种对集成边沿触发器或自制边沿触发器的建立时间进行物理测量的方法, 利用同一脉冲分别作用于触发器的时钟端和输入端, 通过延时器对两个端口的脉冲进行时延扫描调节, 就可测得该触发器的误码统计分布曲线, 从而获得较为精确的建立时间参数。对集成边沿触发器74LS74芯片进行了实测, 测试精度可达1ps。
Abstract
Setup time is an important technical parameter of edge flipflop, which plays a key role in the design of crossclock domain circuits and highspeed digital circuits. In this paper, a physical measurement method was introduced for the setup time of the integrated edge flipflop or the selfmade edge flipflop. By using the same pulse to act on the clock end and the input end of the flipflop respectively, and using the delayer to scan and adjust the pulse time delay of the two ports, the statistical error distribution curve of the flipflop was obtained, thus more accurate parameters of setup time were obtained. Measurement was performed on the integrated edge flipflop 74LS74 chip, and the accuracy of 1ps was realized.

侯凤妹, 李长安, 赵刚. 基于误码统计的边沿触发器建立时间测量方法[J]. 半导体光电, 2018, 39(5): 640. HOU Fengmei, LI Changan, ZHAO Gang. Measurement Method for Setup Time of Edge Triggered Flip Flops Based on Bit Error Statistics[J]. Semiconductor Optoelectronics, 2018, 39(5): 640.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!