应用光学, 2018, 39 (6): 785, 网络出版: 2019-01-10  

导弹跟踪能力的目标源与条件保障车的设计

Design of target source for missile tracking capabilities and guarantee vehicle
作者单位
1 南京理工大学 机械工程学院, 江苏 南京 210094
2 上海机电工程研究所, 上海 201100
摘要
为了验证实验室环境下红外导引头跟踪能力的精度, 设计了一套模拟飞行目标能量分布的目标源以及一款能够满足相应姿态条件的保障车。采用焦距为700 mm的离轴抛物面反射镜, 满足2′束散角的要求, 利用多个反射镜及离轴镜构成反射式平行光管, 模拟空间距离, 通过1%和10%两片衰减片与光阑孔调节, 实现三档能量的需要。采用微调升降机构实现0°~10°俯仰角的调节, 滚转机构用以满足0°~10°的滚转角调节, 运用液压升降机构达到0~1 000 mm升降指标。依靠力学计算和静力学分析, 得出升降臂的最大变形量为0.11 mm, 最大应力为111.6 MPa, 能够满足1 000 kg负载的要求, 同时车架的模态分析所得到的一阶振型的固有频率为25.355 Hz, 远大于产生共振的条件, 满足所设计的目标源和条件保障车指标要求。
Abstract
In order to verify the accuracy of the tracking ability of infrared seeker in laboratory environment, a set of target sources that can simulate the energy distribution of flying targets and a guarantee vehicle that can meet the corresponding posture conditions were designed. An off-axis parabolic reflective mirror with a focal length of 700 mm was used to meet the requirements of 2′ beam divergenceangle, multiple mirrors and off-axis mirrors were used to form a reflective collimator to simulate spatial distance, the requirement of the third gear energy was realized by 1% and 10% two-piece attenuator and the adjustment of optical pupil. The fine adjustment lifting mechanism was used to realize the adjustment of 0°~10° pitch angle, the rolling mechanism was used to meet the adjustment of 0°~10° roll angle, and the hydraulic lifting mechanism was used to achieve 0~1 000 mm lifting index. The result that the maximum deformation of the lifting arm is 0.11 mm and the maximum stress is 111.6 MPa after mechanical calculations and static analysis, which can meet the requirements of 1 000 kg load. Moreover,the first-order mode shape obtained by the modal analysis of the frame has a natural frequency of 25.355 Hz, which is much larger than the condition for generating resonance. Therefore, the target source and condition guarantee vehicles meet the requirements of the indicator.

颜志刚, 曹奕涛, 邱亚峰. 导弹跟踪能力的目标源与条件保障车的设计[J]. 应用光学, 2018, 39(6): 785. Yan Zhigang, Cao Yitao, Qiu Yafeng. Design of target source for missile tracking capabilities and guarantee vehicle[J]. Journal of Applied Optics, 2018, 39(6): 785.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!