应用激光, 2019, 39 (2): 275, 网络出版: 2019-06-10   

1 064 nm MOPA激光器非晶硅薄膜太阳能电池清边工艺研究

Edge Cleaning Processing of a-Si∶H Thin Film Solar Cell with 1 064 nm MOPA Laser
李勇 1,2,*秦应雄 2
作者单位
1 武汉软件工程职业学院,湖北 武汉 430223
2 华中科技大学 激光加工国家工程研究中心,湖北 武汉 430074
摘要
利用1 064 nm MOPA光纤激光器对非晶硅薄膜太阳能电池制备工序中的激光清边工序进行了实验研究,探讨了激光器脉冲宽度、填充线间距、扫描速度等工艺参数对加工效果的影响。在脉冲宽度100 ns,重复频率80 kHz,填充线间距35 μm,输出功率比100%,扫描速度3 500 mm/s,光斑交叠比wx=0.83,wy=0.88的参数下,获得了清边区表面理想,电阻值>1 000 MΩ的良好清边效果。
Abstract
The laser edge cleaning process in the preparation process of a-Si∶H thin film solar cell was experimentally studied by using a 1 064 nm MOPA fiber laser. The effects of process parameters such as laser pulse width, filling line spacing, scanning speed and others on the processing results were discussed. Under the parameters of pulse width 100 ns, repetition frequency 80 kHz, filling line spacing 35 μm, output power ratio 100%, scanning speed 3 500 mm/s, spot overlap ratio wx=0.83, wy=0.88, a good edge cleaning effect was obtained on the surface of the clear-edged area with a resistance >1 000 MΩ.

李勇, 秦应雄. 1 064 nm MOPA激光器非晶硅薄膜太阳能电池清边工艺研究[J]. 应用激光, 2019, 39(2): 275. Li Yong, Qin Yingxiong. Edge Cleaning Processing of a-Si∶H Thin Film Solar Cell with 1 064 nm MOPA Laser[J]. APPLIED LASER, 2019, 39(2): 275.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!