光电技术应用, 2019, 34 (4): 64, 网络出版: 2019-09-09   

机床主轴温升性能验证与改善

Testing and Improvement of Temperature Rising Performance of Machine Tool Spindle
作者单位
1 沈阳理工大学机械工程学院, 沈阳 110168
2 沈阳机床(集团)有限责任公司, 沈阳 110142
3 北京天地玛珂电液控制系统有限公司, 北京 100020
摘要
机床主轴系统的热特性是影响其加工精度的主要因素之一, 对主轴系统进行热特性相关分析尤为重要。以TPX6111E/3数控镗床为研究对象, 利用FLIR热成像仪和米铱激光三角测量系统, 分析不同季节条件下, 相同转速数控镗床在温升时两次所产生的热变形对比情况。实验得出结论: 因季节(即时间)不同,环境温度相差很大, 同一数控镗床相同转速条件下, 主轴各对应点的温度值相差很大; 主轴分别在X、Y方向上的热变形也不相同, 进而在加工过程中对主轴的工况条件提出了更高的要求。
Abstract
The thermal characteristics of machine tool spindle system are one of the main factors affecting its processing accuracy, so it is particularly important to analyze the thermal characteristics of the spindle system. Taking TPX6111E/3 numerical control (NC) boring machine as the research object, using FLIR thermal imager and Iridium laser triangulation measurement system, the thermal deformation of NC boring machine with the same speed in different seasons is analyzed. Experimental results show that the ambient temperature varies greatly depending on the season or time. The temperature values of the corresponding points of the spindle of the same NC boring machine at the same speed are quite different. The thermal deformations of the spindle in X and Y directions are also different, and higher requirements are put forward for the working conditions of the spindle in the process of processing.

郭聪, 史安娜, 任伟萌, 马晓波, 邓智鹏, 王帅. 机床主轴温升性能验证与改善[J]. 光电技术应用, 2019, 34(4): 64. GUO Cong, SHI An-na, REN Wei-meng, MA Xiao-bo, DENG Zhi-peng, WANG Shuai. Testing and Improvement of Temperature Rising Performance of Machine Tool Spindle[J]. Electro-Optic Technology Application, 2019, 34(4): 64.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!