红外与毫米波学报, 2019, 38 (4): 04412, 网络出版: 2019-10-14   

1.55 μm AlGaInAs/InP小发散角量子阱激光器的仿真和制备

Simulation and fabrication of 1.55 μm AlGaInAs/InP quantum well lasers with low beam divergence
作者单位
1 中国科学院半导体研究所 集成光电子国家重点实验室,北京 100083
2 中国科学院大学 材料科学与光电工程中心,北京 100083
摘要
理论仿真和实验制备了AlGaInAs/InP材料1.55 μm小发散角量子阱激光器.为了扩展近场光场并减小内损耗,将一个非对称模式扩展层插入到外延结构的下盖层当中.仿真结果表明,该模式扩展层除了少量增加激光器阈值电流以外,在不影响激光器其它性能的情况下能显著减小激光器的垂直远场发散角.实验结果与理论仿真高度吻合.成功制备出脊宽4 μm,腔长1000 μm的脊波导小发散角激光器.在端面未镀膜的情况下,该激光器阈值电流为56 mA,输出功率为17.38 mw@120 mA,斜率效率可以达到0.272 W/A.实验测得垂直远场发散角为29.6°,相比较传统激光器减小了约35.3%.
Abstract
1.55 μm AlGaInAs/InP quantum well lasers with low beam divergence have been theoretically designed and experimentally fabricated. An asymmetrical mode expand layer (MEL) was inserted in lower cladding to expand near field intensity distribution and decrease internal loss. Simulation results showed that the use of MEL didn’t influence the laser performance negatively but dramatically decreased the vertical beam divergence at the cost of slightly increase of threshold current. And the experiment results showed high agreement to it. With a 4 μm-wide and 1000 μm-long ridge waveguide laser with MEL, the threshold current and output power of single facet without coating is 56 mA and 17.38 mw@120 mA, and the slope efficiency is 0.272 W/A. The vertical beam divergence is 29.6° and decreases about 35.3% compared to that of typical lasers.

熊迪, 郭文涛, 郭小峰, 刘海峰, 廖文渊, 刘维华, 张杨杰, 曹营春, 谭满清. 1.55 μm AlGaInAs/InP小发散角量子阱激光器的仿真和制备[J]. 红外与毫米波学报, 2019, 38(4): 04412. XIONG Di, GUO Wen-Tao, GUO Xiao-Feng, LIU Hai-Feng, LIAO Wen-Yuan, LIU Wei-Hua, ZHANG Yang-Jie, CAO Ying-Chun, TAN Man-Qing. Simulation and fabrication of 1.55 μm AlGaInAs/InP quantum well lasers with low beam divergence[J]. Journal of Infrared and Millimeter Waves, 2019, 38(4): 04412.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!