强激光与粒子束, 2019, 31 (10): 103221, 网络出版: 2019-10-14  

圆柱腔体光电输运的蒙特卡罗模拟

Monte Carlo simulations of photon-electron transports of cylinder cavity
作者单位
北京应用物理与计算数学研究所, 北京 100094
摘要
应用三维并行蒙特卡罗程序JMCT, 计算了特征温度分别为1, 3, 5, 8 keV的黑体谱X射线入射到铝、二氧化硅、金的表面的背散射光电产额和电子能谱, 并与文献结果进行对比, 验证了程序的正确性, 进而针对系统电磁脉冲(SGEMP)研究中的典型几何结构--金属圆柱腔体, 模拟计算了其在黑体谱X射线照射下的光电输运过程, 用温度为1 keV、注量为1 J/m2的黑体谱X射线平行照射圆柱腔侧面, 半个侧面发射光电子, 计算得出了和方位角相关的不同面上发射光电子的光电产额、能谱分布和角分布, 结果表明掠入射的X射线会产生更高的光电产额; 光电子的发射角分布都基本符合余弦角分布的规律。
Abstract
Using the three dimensional and paralleled JMCT Monte Carlo code, the backscattered photoelectric yields and electron energy spectra are calculated for the cases that black body X-ray sources of temperatures of 1, 3, 5, 8 keV impact on the material surfaces of Al, SiO2 and Au respectively. The simulation results are consistent with the results in references, which verify the validity of the code. Then the typical photon-electron transport example in SGEMP for black body X-rays impacting on a cylinder cavity is calculated. Half of the side-face of the cylinder emits photoelectrons in the case that the black body X-rays of temperature 1 keV and fluence 1 J/m2 impact on the side-face of the cylinder. The photoelectron parameters of photoelectric yield, energy distribution and angular distribution related with azimuth are calculated. The results show that obliquely incident X-ray could induce higher photoelectric yields than normally incident X-ray and the distributions of photoelectrons are all very close to cosine distribution.

孙会芳, 张玲玉, 董志伟, 周海京. 圆柱腔体光电输运的蒙特卡罗模拟[J]. 强激光与粒子束, 2019, 31(10): 103221. Sun Huifang, Zhang Lingyu, Dong Zhiwei, Zhou Haijing. Monte Carlo simulations of photon-electron transports of cylinder cavity[J]. High Power Laser and Particle Beams, 2019, 31(10): 103221.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!