光通信技术, 2019, 43 (11): 54, 网络出版: 2019-11-21  

12信道波分-模分-偏振混合复用光通信系统的性能分析

Performance analysis of 12 channels WDM-MDM-PDM optical communication system
作者单位
1 南京邮电大学 电子与光学工程学院,南京 210023
2 南京邮电大学 贝尔英才学院,南京 210023
摘要
为了提高光通信系统传输容量,提出了一个新型12信道波分-模分-偏振混合复用系统,将波分复用器与模分复用器组合放置,使系统可以适应波分模分混合复用。12个信道的信号通过少模光纤传输,结合恒模算法对输出信号解复用。应用VPI transmission Maker仿真平台,分析了波长间隔、发射机输出功率和激光器线宽对系统性能的影响。仿真结果表明:在信噪比为20 dB,发射机输出功率为0 dBm时,利用2波长6模式,每个模式携带25 Gb/s的数据,在误码率为10-4量级下,实现了25×2×6 Gb/s 偏振复用二进制正交振幅调制(PDM-4QAM)信号10 km无中继传输。
Abstract
In order to improve the transmission capacity of the optical communication system, this paper proposes a new type of 12 channels wavelength-mode-polarization division hybrid multiplexing system, and the wavelength division multiplexing device is combined with the mode division multiplexer, so that the system can be adapted to the wavelength-mode division hybrid multiplexing. Signals of 12 channels are transmitted by the few-mode fiber, and the output signal is decompressed with a constant mode algorithm. Through the VPI transmission Maker simulation platform, the influence of wavelength interval, transmitter output power and laser line width on the performance of the system is analyzed. The simulation results show that under the condition that the signal-to-noise ratio is 20 dB and the transmitter output power is 0 dBm, using 2 wavelengths and 6 modes, each mode carries the 25 Gb/s data, and the bit error rate is in the 10-4 volume level to realize the 25×2×6 Gb/s polarization division multiplexing-binary quadrature amplitude modulation(PDM-4QAM) signal transmits 10 km without relaying.

叶凡, 季珂, 陈鹤鸣. 12信道波分-模分-偏振混合复用光通信系统的性能分析[J]. 光通信技术, 2019, 43(11): 54. YE Fan, JI Ke, CHEN Heming. Performance analysis of 12 channels WDM-MDM-PDM optical communication system[J]. Optical Communication Technology, 2019, 43(11): 54.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!