液晶与显示, 2020, 35 (5): 449, 网络出版: 2020-05-30   

基于STM32F4的多通道串口驱动TFT液晶屏显示系统设计

Design of TFT LCD display system driven by multi-channel serial port based on STM32F4
作者单位
江西理工大学 信息工程学院, 江西 赣州 341000
摘要
针对TFT液晶屏使用中存在驱动较为复杂以及对处理器要求较高的问题, 设计了一种通过串口控制驱动MUC接口TFT液晶屏的显示系统。该系统的硬件由STM32F4处理器和TFT液晶屏组成, STM32F4用于驱动TFT液晶屏, 并通过其串口向使用TFT液晶屏显示系统的外部处理器提供控制通道; 软件利用μC/OS-Ⅲ操作系统编写底层驱动程序和驱动控制接口程序, 采用DMA方式读取串口数据 。该系统硬件接口简单, 只需要两根I/O线就能对TFT液晶屏进行控制, 最大可同时支持4个外部处理器通过串口对TFT液晶屏进行控制, 串口传输速率为2.4 KB/s~2 MB/s。实验结果表明, 该系统运 行稳定可靠, 显示效果清晰流畅, 简化了TFT液晶屏的驱动和使用, 拓展了TFT液晶屏的适应性和使用范围。
Abstract
In order to solve the problem of complex driving and high requirement of processor in TFT LCD, a display system is designed to drive the TFT LCD with MUC interface through serial port control. The hardware of the system is composed of STM32F4 processor and TFT LCD. Stm32f4 is used to drive TFT LCD and provide control channel to the external processor using TFT LCD display system through its serial port. The software uses μC/OS-Ⅲ operating system to write the bottom driver and driver control interface program, and uses DMA to read the serial port data. The hardware interface of the system is simple, only two I/O lines are needed to control the TFT LCD. The system can support four external processors to control the TFT LCD through the serial port. The serial port transmission rate is 2.4 kB/s~2 MB/s. The experimental results show that the system is stable and reliable, the display effect is clear and smooth, the drive and use of TFT LCD are simplified, and the adaptability and use range of TFT LCD are expanded.

任克强, 王传强. 基于STM32F4的多通道串口驱动TFT液晶屏显示系统设计[J]. 液晶与显示, 2020, 35(5): 449. REN Ke-qiang, WANG Chuan-qiang. Design of TFT LCD display system driven by multi-channel serial port based on STM32F4[J]. Chinese Journal of Liquid Crystals and Displays, 2020, 35(5): 449.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!