光学学报, 2019, 39 (8): 0806002, 网络出版: 2019-08-07   

可编程光纤延时系统特性 下载: 954次

Characteristics of Programmable Optical Fiber Delay System
作者单位
1 北京理工大学光电学院, 北京 100081
2 北京理工大学精密光电测试仪器及技术北京市重点实验室, 北京 100081
摘要
采用17个光开关和16段不同长度光纤的级联方式,搭建了一套可编程光纤延时系统,实现的延时范围为0~65535 ns,步长为1 ns,数据刷新率可达100 Hz,延时稳定性为0.2 ns,延时抖动小于0.32 ns,整套系统损耗小于31 dB。对可编程光纤延时系统的延时精度、损耗和数据刷新率等特性进行了研究,分析了损耗和色散对延时测量的影响,提出了一种减少延时测量误差的阈值补偿法,弥补了损耗和色散引起的延时测量误差。
Abstract
A programmable optical fiber delay system is built by using 17 optical switches and 16 optical fibers with different lengths. The system can realize the delay range of 0-65535 ns,step length of 1 ns, maximum data refresh rate of 100 Hz, delay stability of 0.2 ns, jitter delay less than 0.32 ns, and loss less than 31 dB. The delay accuracy, loss, and data refresh rate of the programmable optical fiber delay system are studied. The influences of loss and dispersion on delay measurement are analyzed. A threshold compensation method to reduce delay measurement error is proposed to compensate for the delay measurement error caused by loss and dispersion.

李炎炎, 高彦泽, 李卓, 杨苏辉, 王欣, 张金英. 可编程光纤延时系统特性[J]. 光学学报, 2019, 39(8): 0806002. Yanyan Li, Yanze Gao, Zhuo Li, Suhui Yang, Xin Wang, Jinying Zhang. Characteristics of Programmable Optical Fiber Delay System[J]. Acta Optica Sinica, 2019, 39(8): 0806002.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!