[1] 陈光炎, 吴嘉丽, 赵龙, 等. 基于阿基米德螺旋线的低g值微惯性开关［J］. 光学 精密工程, 2009, 17(6): 1257-1261.

    CHEN G Y, WU J L, ZHAO L, et al.. Low-g micro inertial switch based on Archimedes’ spiral［J］. Opt. Precision Eng., 2009, 17(6): 1257-1261.

[2] IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers［S］. 2009.

[3] 王世明, 任顺清. 精密离心机误差对石英加速度计误差标定精度分析［J］. 宇航学报, 2012, 33(4): 520-526.

    WANG SH M, REN SH Q. Relationship between calibration accuracy of error model coefficients of accelerometer and error of precision centrifuge［J］. Journal of Astronautics, 2012, 33(4): 520-526.(in Chinese)

[4] 陈希军, 任顺清, 李巍. 加速度计高阶误差模型系数的标定方法［J］. 中国惯性技术学报, 2010, 18(4): 508-512.

    CHEN X J, REN SH Q, LI W. Calibrating method for high-order coefficients in accelerometer error model［J］. Journal of Chinese Inertial Technology, 2010, 18(4): 508-512.(in Chinese)

[5] CHEN X J, REN SH Q. Two algorithms of working acceleration generated by a precision centrifuge with two rotating axes［J］. Journal of Harbin Institute of Technology(New Series),2006,13(1): 1-3.

[6] 乔仁晓, 孟晓风, 季宏. 加速度计非线性项系数校准误差分析与建模［J］. 系统仿真学报, 2008, 20(6): 1633-1635.

    QIAO R X, MENG X F, JI H. Error analysis and modeling in calibration of accelerometer’s nonlinear terms’s coefficients［J］. Journal of System Simulation, 2008, 20(6): 1633-1635.(in Chinese)

[7] JJG1066-2011. 精密离心机检定规程［S］. 2011.

    JJG1066-2011. Verification Regulation of Precision Centrifuge［S］. 2011.(in Chinese)

[8] 吴付岗, 王军. 精密离心机加速度载荷模型研究［J］. 机械工程学报, 2010, 46(18): 36-40.

    WU F G, WANG J. Research on acceleration load model of precision centrifuge［J］. Journal of Mechanical Engineering, 2010, 46(18): 36-40.(in Chinese)

[9] JJF 1116-2004. 线加速度计的精密离心机校准规范［S］. 2004.

    JJF 1116-2004. Calibration Specification for Linear Accelerometer Used Precision Centrifuge［S］. 2004.(in Chinese)

[10] 杨巨宝. 精密离心机半径值动态测试系统［J］. 宇航计测技术,1994, 13(2): 5-10.

    YANG J B. Dynamic measurement system for the radius of precision centrifuge［J］. Journal of Astronautic Metrology and Measurement, 1994, 13(2): 5-10.(in Chinese)

[11] 陈希军, 孙群学, 任顺清. 离心机大臂动态半径长度的测量［J］. 宇航计测技术,2002, 22(2): 10-13.

    CHEN X J, SUN Q X, REN SH Q. Measurement of centrifuge arm’s dynamic radius length［J］. Journal of Astronautic Metrology and Measurement, 2002,22(2): 10-13.(in Chinese)

[12] 刘健, 王光宝, 刘宇, 等. 转台离心机动态半径测试方法的研究［J］. 宇航计测技术,2006, 26(6): 1-3.

    LIU J, WANG G B, LIU Y, et al.. Revolving table centrifugal machine dynamic radius measuring method ［J］. Journal of Astronautic Metrology and Measurement,2006, 26(6): 1-3.(in Chinese)

[13] 熊磊, 何懿才, 龙祖洪, 等. 精密离心机不确定度分析与应用［J］. 航空计测技术, 2003, 23(6): 36-37.

    XIONG L, HE Y C, LONG Z H, et al.. Uncertainty analysis and application of precise centrifuge ［J］. Metrology & Measurement Technology, 2003, 23(6): 36-37.(in Chinese)

[14] Uncertainty of measurement-Part 3: Guide to the expression of uncertainty in measurement［S］. ISO/IEC GUIDE 98-3.

[15] MOSCHIONI G, SAGGIN B, TARABINI, et al.. Use of design of experiments and Monte Carlo method for instruments optimal design［J］. Measurement, 2013, (46): 976-984.

[16] 凌明祥, 王珏, 宁菲, 等. 地球自转及天体作用力对精密离心机的影响［J］. 装备环境工程, 2014, 11(1): 97-99.

    LING M X, WANG J, NING F, et al.. Influence of Earth’s rotation and Celestial forces on precision centrifuge［J］. Equipment Environment Engineering, 2014, 11(1): 97-99.(in Chinese)

[17] 凌明祥, 李明海, 杨新, 等. 高精度精密离心机静态半径测量方法与应用［J］. 仪器仪表学报, 2014, 35(5): 1072-1078.

    LING M X, LI M H, YANG X, et al.. A measurement method and application for static radius of high precision centrifuge ［J］. Chinese Journal of Scientific Instrument, 2014, 35(5): 1072-1078.(in Chinese)