激光熔覆制备CrNiAlCoMoBx系高熵合金涂层的组织与性能研究

为了拓展激光熔覆制备高熵合金涂层在材料表面改性中的应用, 本文利用激光熔覆的方法在45#钢基体上制备了成形质量良好的CrNiAlCoMoBx系高熵合金涂层, 并研究了激光熔覆工艺参数和B含量对涂层成形质量、微观组织结构和硬度的影响。结果表明: 在优化的工艺参数下, 可以得到表面形貌良好的CrNiAlCoMoBx系高熵合金涂层, 涂层与基体呈良好的冶金结合, 涂层由枝晶和网状共晶组织组成, 均匀致密, 最高硬度达到950 HV0.2, 平均硬度可达700 HV0.2, 是基体45#钢硬度的3倍。随着B含量的增加, 裂纹减少, 硬度有所降低, 但始终在600 HV0.2以上; 涂层的干摩擦磨损性能优于H13钢; 在3.5%NaCl电解液中耐腐蚀性良好, 与304不锈钢相当。

Abstract

To develop the application of laser cladding for preparing high entropy alloy coating on surface modification of materials, the CrNiAlCoMoBx coating with good formation was prepared on 45 steel by laser cladding, and the effects of laser cladding parameters and the content of B on coating quality, microstructure and hardness were investigated. The results show that CrNiAlCoMoBx high entropy alloy coating with good surface morphology can be prepared with the optimal processing parameters. The coating is metallurgical bonded with the substrate. The dense coating consists of dendrites and net-like eutectic structures. The maximum hardness is 950 HV0.2, and the average value of hardness reaches 700 HV0.2 which is 3 times of 45 steel’s. With increasing of B content in the coating, the crack reduces, and the hardness decreases but it is still higher than 600 HV0.2. The dry friction and wear performance of the coating is better than that of H13 steel. The corrosion resistance of the coating in the 3.5% NaCl electrolyte is excellent that is equivalent to 304 stainless steel.

参考文献

[1] CHOU Y L, WANG Y C, YEH J W.Pitting corrosion of the high-entropy alloy Co1.5CrFeNi1.5Ti0.5Mo0.1 in chloride-containing sulphate solutions［J］. Advanced Engineering Materials, 2010, 52(6): 3481-3491.

[2] 张晖, 何宜柱, 李维火, 等.激光熔覆BCC结构高硬度高断裂韧性高熵合金涂层［J］.材料热处理学报, 2011, 15(6): 231-234.

[3] 马明星, 谷雨, 张伟明, 等.激光制备AlxCoCrNiMo高熵合金涂层的研究［J］.应用激光, 2010, 30(6): 433-437.

[4] 黄祖凤, 张冲, 唐群华, 等.退火对激光熔覆FeCoCrNiB高熵合金涂层组织结构与硬度的影响［J］.表面技术, 2013, 23(1): 9-13.

[5] YEH J W, CHEN S K, LIN S J, et al.Nanostructured high-entropy alloys with multiple principal elements nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering［J］.Advanced Engineering Materials, 2004, 6(5): 299-303.

[6] 童重缙.CuCoNiCrAlFe高熵合金变形结构与高温特性之研究［D］.台湾: 台湾国立清华大学材料科学与工程研究所, 2002.

[7] 罗晓燕, 刘贵仲, 李伟, 等.AlFeCoNiCrTiVx系高熵合金的组织结构及电化学性能［J］.腐蚀与防护, 2010, 31(5): 355-359.

[8] 陈岳锋. CoCrFrNiTi高乱度合金块材与薄膜性质之研究［D］.台湾: 台湾私立中国文化大学材料科学与纳米科技研究所, 2004.

[9] 翁子清.激光熔覆高熵合金涂层的组织与性能研究［D］.杭州: 浙江工业大学, 2012.

[10] 李安敏, 张喜燕.Al对AlCrCuFeNi高熵合金的组织与硬度的影响［J］.材料热处理技术, 2008, 44(6): 26-28.

[11] 代丽, 刘黎明.AlBxCrCu0.5FeTi高熵合金的微观组织与硬度研究［J］.广州化工, 2012, 5(16): 66-68.

[12] 温诗铸.材料磨损研究的进展与思考［J］.摩擦学学报, 2008, 28(1): 1-5.

[13] 李小艳, 王树奇, 崔向红, 等. 铬和钼对精铸热锻模具钢高温磨损行为的影响［J］. 铸造技术, 2007, 28(6): 761-765.

[14] REVIE R, WINSTON UHLIG. Corrosion handbook ［M］.New York: J Wiley & Sons, 2005.

[15] UHLIG H.Structure and growth of thin films on metals exposed to oxygen ［J］. Corrosion Science, 1967(7): 325-330.

[16] 朱祖芳.有色金属的耐腐蚀性及其应用［M］.北京: 化学工业出版社, 1995.

邹朋津, 董刚, 姚建华. 激光熔覆制备CrNiAlCoMoBx系高熵合金涂层的组织与性能研究[J]. 应用激光, 2015, 35(1): 1. Zou Pengjin, Dong Gang, Yao Jianhua. Microstructure and Properties of CrNiAlCoMoBx High Entropy Alloy Coating Prepared by Laser Cladding[J]. APPLIED LASER, 2015, 35(1): 1.

激光熔覆制备CrNiAlCoMoBx系高熵合金涂层的组织与性能研究

关于本站 Cookie 的使用提示

全站搜索

激光熔覆制备CrNiAlCoMoBx系高熵合金涂层的组织与性能研究

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索