[1] 钦兰云, 杨光, 王维, 等．激光沉积修复BT20合金的显微组织和力学性能［J］．强激光与粒子束, 2014, 26(2): 1-5．

    QIN LANYUN, YANG GUANG, WANG WEI, et al．Microstructure and mechanical properties of laser deposition repair BT20 alloy［J］．High Power Laser and Particle Beams, 2014, 26(2): 1-5．

[2] 钦兰云, 杨光, 卞宏友, 等．磁场搅拌辅助激光沉积成形钛合金试验研究［J］．中国激光, 2014, 41(3): 1-5．

    QIN LANYUN, YANG GUANG, BIAN HONGYOU, et al．Experimental study on electromagnetic stirring assisted laser metal deposition titanium alloy［J］．Chinese Journal Of Lasers, 2014, 41(2): 1-5．

[3] 钦兰云, 王婷, 杨光, 等．激光沉积修复BT20合金的试验研究［J］．红外与激光工程, 2014, 43(2): 1-6．

    QIN LANYUN, WANG TING, YANG GUANG, et al．Experimental study on laser deposition repair BT20 alloy component［J］．Infrared And Laser Engineering, 2014, 43(2): 1-6．

[4] 薛蕾, 陈静, 张凤英, 等．飞机用钛合金零件的激光快速修复［J］．稀有金属材料与工程, 2006, 35(11): 1817-1821．

    XUE LEI, CHEN JING, ZHANG FENGYING, et al．Laser Rapid repair of theaircraft components oftitanium alloy［J］．Rare Metal Materials and Engineering, 2006, 35(11): 1817-1821．

[5] 宋建丽, 李永堂, 邓琦林, 等．激光熔覆技术的研究进展［J］．机械工程学报, 2010, 46(14): 30-36．

    SONG JIANLI, LI YONGTANG, DENG QILIN, et al．Research progress of laser cladding forming technology ［J］．Journal of Mechanical Engineering, 2010, 46(14): 30-36．

[6] LEWIS G K, E SCHLIENGER, MATER DES．Advances in laser forming ［J］.Journal of Laser Applicationg, 2000, 21(2): 417-423．

[7] HOFMEISTER W, M WERT, H SMUGERESKY, et a1．Thermal stresses and deposition patterns in layered manufacturing ［J］. Materials Science and Engineering, 2001, 53(9): 30-34．

[8] 王华明, 张述泉, 王向明．大型钛合金结构件激光直接制造的进展与挑战［J］．中国激光, 2010, 36(12): 3204-3209．

    WANG HUAMING, ZHANG SHUQUAN, WANG XIANGMING．Progress and Challenges of Laser Direct Manufacturing of Large Titanium Structural Components［J］．Chinese Journal of Lasers, 2009, 36(12): 3204-3209．

[9] 王俊伟, 陈静, 刘彦红, 等．激光立体成形TC17钛合金组织研究［J］．中国激光, 2010, 37(3): 847-851．

    WANG JUNWEI, CHEN JING, LIU YANHONG, et al．Research on microstructure of TC17 titanium alloy fabricated by laser solid forming［J］．Chinese Journal of Lasers, 2010, 39(3): 847~851．

[10] 杨光, 王维, 钦兰云, 等. Ti6Al4V合金表面激光沉积复合涂层的组织和性能［J］．强激光与粒子束, 2013, 25(10): 2723-2728．

    YANG GUANG, WANG WEI, QIN LANYUN, et al．Microstructure and property of laser metal deposition composite coating on Ti6Al4V alloy surface［J］．High Power Laser and Particle Beams, 2013, 25(10): 2723-2728．

[11] 孔源, 刘伟军, 王越超, 等．钛合金激光直接成形过程中热力耦合场的数值模拟［J］．机械工程学报, 2011, 47(24): 74-82．

    KONG YUAN, LIU WEIJUN, WANG YUECHAO, et al．Numericalsimulation of temperature field and stress field of direct. Laser metal deposition shaping process of titanium alloys［J］．Journal of Mechanical Engineering, 2011, 47(24): 74-82．

[12] LABUDOVIC M,HU D, KOVACEVIC R．A three dimension model for direct laser metal powder deposition and rapid prototyping［J］．Journal of Materials Science, 2003, 38(1): 35-49．

[13] 席明哲, 张永忠, 石力开, 等．激光快速成形金属薄壁零件的三维瞬态温度场数值模拟［J］．中国有色金属学报, 2003, 13(4): 887-892．

    XI MINGZHE, ZHANG YONGZHONG, SHI LIKAI, et al．Numerical simulation of 3D transient temperature field in thin-wall metal parts fabricate by laser direct Deposition［J］．The Chinese Journal of Nonferrous Metals, 2003, 13(4): 887-892．

[14] 王福雨, 刘伟军, 赵宇辉, 等．复杂薄壁零件激光快速成形过程的热力耦合场数值模拟［J］．机械工程学报, 2013, 49(5): 192-196．

    WANG FUYU, LIU WEIJUN, ZHANG YUHUI, et al．Thermo-mechanical coupling field simulation of complex thin-wall part laser rapid prototype process［J］．Journal of Mechanical Engineering, 2013, 49(5): 192-196．

[15] 张国志, 胡喜仁, 陈继刚, 等．热力学有限元分析实例指导教程［M］．北京: 机械工业出版社, 2007, 6: 86-87.

    ZHANG GUOZHI, HU XIREN, CHEN JIGANG, et al．Guidance of thermodynamics finite element analysis［M］．Beijing: China Machine Press, 2007, 6: 86-87．