激光沉积修复TA15钛合金热应力的数值模拟
[1] 钦兰云, 杨光, 王维, 等.激光沉积修复BT20合金的显微组织和力学性能[J].强激光与粒子束, 2014, 26(2): 1-5.
[2] 钦兰云, 杨光, 卞宏友, 等.磁场搅拌辅助激光沉积成形钛合金试验研究[J].中国激光, 2014, 41(3): 1-5.
QIN LANYUN, YANG GUANG, BIAN HONGYOU, et al.Experimental study on electromagnetic stirring assisted laser metal deposition titanium alloy[J].Chinese Journal Of Lasers, 2014, 41(2): 1-5.
[3] 钦兰云, 王婷, 杨光, 等.激光沉积修复BT20合金的试验研究[J].红外与激光工程, 2014, 43(2): 1-6.
QIN LANYUN, WANG TING, YANG GUANG, et al.Experimental study on laser deposition repair BT20 alloy component[J].Infrared And Laser Engineering, 2014, 43(2): 1-6.
[4] 薛蕾, 陈静, 张凤英, 等.飞机用钛合金零件的激光快速修复[J].稀有金属材料与工程, 2006, 35(11): 1817-1821.
XUE LEI, CHEN JING, ZHANG FENGYING, et al.Laser Rapid repair of theaircraft components oftitanium alloy[J].Rare Metal Materials and Engineering, 2006, 35(11): 1817-1821.
[5] 宋建丽, 李永堂, 邓琦林, 等.激光熔覆技术的研究进展[J].机械工程学报, 2010, 46(14): 30-36.
SONG JIANLI, LI YONGTANG, DENG QILIN, et al.Research progress of laser cladding forming technology [J].Journal of Mechanical Engineering, 2010, 46(14): 30-36.
[6] LEWIS G K, E SCHLIENGER, MATER DES.Advances in laser forming [J].Journal of Laser Applicationg, 2000, 21(2): 417-423.
[7] HOFMEISTER W, M WERT, H SMUGERESKY, et a1.Thermal stresses and deposition patterns in layered manufacturing [J]. Materials Science and Engineering, 2001, 53(9): 30-34.
[8] 王华明, 张述泉, 王向明.大型钛合金结构件激光直接制造的进展与挑战[J].中国激光, 2010, 36(12): 3204-3209.
WANG HUAMING, ZHANG SHUQUAN, WANG XIANGMING.Progress and Challenges of Laser Direct Manufacturing of Large Titanium Structural Components[J].Chinese Journal of Lasers, 2009, 36(12): 3204-3209.
[9] 王俊伟, 陈静, 刘彦红, 等.激光立体成形TC17钛合金组织研究[J].中国激光, 2010, 37(3): 847-851.
[10] 杨光, 王维, 钦兰云, 等. Ti6Al4V合金表面激光沉积复合涂层的组织和性能[J].强激光与粒子束, 2013, 25(10): 2723-2728.
[11] 孔源, 刘伟军, 王越超, 等.钛合金激光直接成形过程中热力耦合场的数值模拟[J].机械工程学报, 2011, 47(24): 74-82.
KONG YUAN, LIU WEIJUN, WANG YUECHAO, et al.Numericalsimulation of temperature field and stress field of direct. Laser metal deposition shaping process of titanium alloys[J].Journal of Mechanical Engineering, 2011, 47(24): 74-82.
[12] LABUDOVIC M,HU D, KOVACEVIC R.A three dimension model for direct laser metal powder deposition and rapid prototyping[J].Journal of Materials Science, 2003, 38(1): 35-49.
[13] 席明哲, 张永忠, 石力开, 等.激光快速成形金属薄壁零件的三维瞬态温度场数值模拟[J].中国有色金属学报, 2003, 13(4): 887-892.
XI MINGZHE, ZHANG YONGZHONG, SHI LIKAI, et al.Numerical simulation of 3D transient temperature field in thin-wall metal parts fabricate by laser direct Deposition[J].The Chinese Journal of Nonferrous Metals, 2003, 13(4): 887-892.
[14] 王福雨, 刘伟军, 赵宇辉, 等.复杂薄壁零件激光快速成形过程的热力耦合场数值模拟[J].机械工程学报, 2013, 49(5): 192-196.
WANG FUYU, LIU WEIJUN, ZHANG YUHUI, et al.Thermo-mechanical coupling field simulation of complex thin-wall part laser rapid prototype process[J].Journal of Mechanical Engineering, 2013, 49(5): 192-196.
[15] 张国志, 胡喜仁, 陈继刚, 等.热力学有限元分析实例指导教程[M].北京: 机械工业出版社, 2007, 6: 86-87.
ZHANG GUOZHI, HU XIREN, CHEN JIGANG, et al.Guidance of thermodynamics finite element analysis[M].Beijing: China Machine Press, 2007, 6: 86-87.
杨光, 丁林林, 钦兰云, 卞宏友, 王维. 激光沉积修复TA15钛合金热应力的数值模拟[J]. 应用激光, 2014, 34(3): 181. Yang Guang, Ding Linlin, Qin Lanyun, Bian Hongyou, Wang Wei. Numerical Simulation of Thermal Stress of Laser Deposition Repair of TA15 Titanium Alloy[J]. APPLIED LASER, 2014, 34(3): 181.