石墨对激光熔覆铁基非晶复合涂层组织和性能的影响
[1] 陈明慧, 朱红梅, 王新林. 激光熔覆制备金属表面非晶涂层研究进展［J］. 材料工程, 2017, 45(1): 120-128.
Chen Minghui, Zhu Hongmei, Wang Xinlin. Research progress on laser cladding amorphous coatings on metallic substrates［J］. Journal of Materials Engineering, 2017, 45(1): 120-128.
[2] 王彦芳, 肖丽君, 刘明星, 等. 激光熔覆制备非晶复合涂层的研究进展［J］. 激光与光电子学进展, 2014, 51(7): 070002.
[3] 张 娈, 董 闯, 王存山, 等. 45钢表面激光熔覆Fe-B-Si铁基非晶复合材料［J］. 材料热处理学报, 2012, 33(10): 116-123.
Zhang Luan, Dong Chuang, Wang Cunshan, et al. Laser cladding of Fe-B-Si iron base amorphous composite materials on 45 steel surface［J］. Transactions of Materials and Heat Treatment, 2012, 33(10): 116-123.
[4] 王彦芳, 栗 荔, 鲁青龙, 等. 不锈钢表面激光熔覆铁基非晶涂层研究［J］. 中国激光, 2011, 38(6): 0603017.
[5] 张培磊, 姚成武, 丁 敏, 等. 激光熔覆制备Fe基非晶化涂层的研究进展［J］. 焊接, 2009(5): 19-23.
Zhang Peilei, Yao Chengwu, Ding Min, et al. Advances on fabrication of Fe-based amorphous coatings with laser cladding［J］. Welding & Joining, 2009(5): 19-23.
[6] Zhang P L, Yan H, Yao C W, et al. Synthesis of Fe-Ni-B-Si-Nb amorphous and crystalline composite coatings by laser cladding and remelting［J］. Surface & Coatings Technology, 2011, 206(6): 1229-1236.
[7] Zhu Y Y, Li Z G, Huang J, et al. Amorphous structure evolution of high power diode laser cladded Fe-Co-B-Si-Nb coatings［J］. Applied Surface Science, 2012, 261: 896-901.
[8] Zhu Y Y, Li Z G, Li R F, et al. High power diode laser cladding of Fe-Co-B-Si-C-Nb amorphous coating: Layered microstructure and properties［J］. Surface & Coatings Technology, 2013, 235: 699-705.
[9] Zhu Y Y, Li Z G, Li R F, et al. Microstructure and property of Fe-Co-B-Si-C-Nb amorphous composite coating fabricated by laser cladding process［J］. Applied Surface Science, 2013, 280: 50-54.
[10] Wang Y F, Li G, Shi Z Q, et al. Effects of graphite addition on the microstructure and properties of laser cladding Zr-Al-Ni-Cu amorphous coatings［J］. Journal of Alloys and Compounds, 2014, 610: 713-717.
[11] Zhu Q J, Qu S Y, Wang X H, et al. Synthesis of Fe-based amorphous composite coatings with low purity materials by laser cladding［J］. Applied Surface Science, 2007, 253(17): 7060-7064.
[12] Tan C L, Zhu H M, Kuang T C, et al. Laser cladding Al-based amorphous-nanocrystalline composite coatings on AZ80 magnesium alloy under water cooling condition［J］. Journal of Alloys & Compounds, 2016, 690: 108-115.
[13] Inoue A, Shen B L, Chang C T. Fe- and Co-based bulk glassy alloys with ultrahigh strength of over 4000 MPa［J］. Intermetallics, 2006, 14(8-9): 936-944.
[14] 唐翠勇, 汪明文, 庄哲峰, 等. 激光熔覆技术制备非晶合金涂层的研究进展［J］. 激光杂志, 2015, 36(12): 22-25.
Tang Cuiyong, Wang Mingwen, Zhuang Zhefeng, et al. Research progress of laser cladding technology to prepare amorphous alloy coating［J］. Laser Journal, 2015, 36(12): 22-25.
[15] 冯爱新, 陈风国, 裴绍虎, 等. 激光熔覆对304不锈钢表面摩擦磨损性能的影响［J］. 材料热处理学报, 2015, 36(8): 223-228.
Feng Aixin, Chen Fengguo, Pei Shaohu, et al. Effects of laser cladding on friction and wear properties of 304 stainless steel［J］. Transactions of Materials and Heat Treatment, 2015, 36(8): 223-228.
[16] 何祥明, 刘秀波, 杨茂盛, 等. 奥氏体不锈钢激光熔覆镍基复合涂层高温磨损行为［J］. 中国激光, 2011, 38(9): 0903007.
[17] 张 辉, 邹 勇, 邹增大, 等. 石墨添加量对Fe-Ti-V-C熔覆层组织及耐磨性的影响［J］. 摩擦学学报, 2014, 34(3): 319-324.
Zhang Hui, Zou Yong, Zou Zengda, et al. Effect of graphite addition on microstructure and wear resistance of Fe-Ti-V-C cladding layers［J］. Tribology, 2014, 34(3): 319-324.
[18] 刘 旭, 王文先, 崔泽琴, 等. B4C含量对激光熔覆Fe基陶瓷复合涂层组织及性能的影响［J］. 材料热处理学报, 2011, 32(s1): 102-106.
Liu Xu, Wang Wenxian, Cui Zeqin,et al. Influence of B4C content on microstructure and properties of laser cladding Fe-based ceramic composite coating［J］. Tranastions of Materials and Heat Treatment, 2011, 32(s1): 102-106.
朱红梅, 林子钦, 叶炜, 申龙章. 石墨对激光熔覆铁基非晶复合涂层组织和性能的影响[J]. 激光与光电子学进展, 2017, 54(6): 061405. Zhu Hongmei, Lin Ziqin, Ye Wei, Shen Longzhang. Effects of Graphite on Structure and Property of Laser Cladded Fe-Based Amorphous Composite Coatings[J]. Laser & Optoelectronics Progress, 2017, 54(6): 061405.
PDF全文
