Mechanistic study of continuous polishing 
Download： 654次
1 Key Laboratory on High Power Laser and Physics, Shanghai Institute of Optics and Fine Mechanics,Chinese Academy of Sciences, Shanghai 201800, China
2 University of Chinese Academy of Sciences, Beijing 100049, China
Figures & Tables
Fig. 1. Program flow chart for surface calculation.
下载图片 查看原文
Fig. 2. Rate of change in the workpiece surface PV.
下载图片 查看原文
Fig. 3. Maintained workpiece surface shape experiment.
下载图片 查看原文
Fig. 4. Lap surface damaged by the workpiece.
下载图片 查看原文
Fig. 5. Change in the workpiece surface.
下载图片 查看原文
Fig. 6. Change in the workpiece surface caused by motion in the radial direction of the lap.
下载图片 查看原文
Fig. 7. Change in the workpiece surface caused by a change in quantity.
下载图片 查看原文
Fig. 8. Workpieces continously polished in an equilibrium state.
下载图片 查看原文
Table1. Parameters for calculation and experiments.
| Outer diameter (mm) | Inner diameter (mm) | Thickness (mm) | |
|---|
| Lap | 690 | 220 | 20 | 1800 | | Conditioning disk | 350 | — | 30 | 3070 | | Workpiece | 150 | — | 20 | 2500 |
|
查看原文
Xiang Jiao, Jianqiang Zhu, Quantang Fan, Yangshuai Li. Mechanistic study of continuous polishing[J]. High Power Laser Science and Engineering, 2015, 3(2): 02000001.
PDF全文
