LED照明准直透镜结构优化设计

严强; 高椿明; 生艳梅; 陈霄; 杨俊

doi:doi:10.3788/lop50.112203

激光与光电子学进展, 2013, 50 (11): 112203, 网络出版: 2013-09-17

LED照明准直透镜结构优化设计下载： 764次

Optimization Design of LED Collimating Lens

论文大纲

严强 ^*高椿明生艳梅陈霄杨俊

作者单位

电子科技大学光电信息学院, 四川成都 610054

光学设计非成像光学准直透镜光能利用率 optical design non-imaging optics collimating lens light-use efficiency LED LED

摘要

基于非成像光学理论，根据固体照明光源LED特性，开展了车用照明准直光学镜头的优化研究。以非成像光学的理论为基础，从现有准直透镜结构出发，建立了简化的LED准直照明结构模型，并利用光学仿真设计软件Zemax对简化的模型进行了优化设计；利用三维建模软件SolidWorks建立准直结构模型，导入光学仿真软件TracePro中进行仿真分析并进一步优化，优化后的准直透镜光能利用率提高了6%；根据优化结果开模制作准直结构样品；最后，建立测试系统，开展优化前后透镜的光学性能对比测试。研究结果表明，5 m处中心最大光强提高了约128%，在相同照度(50 lx)处照射面积提高了约25%。

Abstract

The lighting collimating lens is designed for the use of headlight of automobile, in which LED is used as lighting source. Firstly, the simplified illumination structure model is built, which is designed based on the theory of non-imaging optics and the parameters of traditional lenses. The structure is optimized by optical simulation software Zemax. Secondly, the three-dimensional (3D) model of lens is set up by SolidWorks software and simulated by TracePro. The results show that the optimized lens′ light-use efficiency is improved by about 6%. Thirdly, the optimized lens is made and prepared for test. Finally, the experimental system is set up, by which the optical characteristics of the traditional and optimized lenses are investigated. The results show that the maximum light intensity is improved by about 128% at 5 m away and the irradiated area at the same illumination (50 lx) is enlarged by about 25%.

参考文献

[1] 严萍, 李剑清. 照明用LED光学系统的计算机辅助设计[J]. 半导体光电, 2004, 25(3): 181-200.

Yan Ping, Li Jianqing. Computer aid design of optical system of LED for illumination [J]. Semiconductor Optoel Ectroncs, 2004, 25(3): 181-200.

[2] 李林, 王光珍, 王丽莉, 等. 实现均匀照明的LED系统设计方法[J]. 光学学报, 2012, 32(2): 0222002.

Li Lin, Wang Guangzhen, Wang Lili, et al.. Lens design for uniform illumination with LED [J]. Acta Optica Sinica, 2012, 32(2): 0222002.

[3] 余桂英, 金骥, 倪晓武, 等. 基于光学扩展量的LED均匀照明反射器的设计[J]. 光学学报, 2009, 29(8): 2297-2301.

Yu Guiying, Jin Ji, Ni Xiaowu, et al.. Design for LED uniform illumination reflector based on etendue [J]. Acta Optica Sinica, 2009, 29(8): 2297-2301.

[4] Shogo Kitano, Shinichiro Haruyama, Masao Nakagawa. LED road illumination communications system [J]. Vehicular Technology Conference 2003, 2003, 5: 3346-3350.

[5] 丁毅, 顾培夫. 实现均匀照明的自由曲面反射器[J]. 光学学报, 2007, 27(3): 540-544.

Ding Yi, Gu Peifu. Freeform reflector for uniform illumination [J]. Acta Optica Sinica, 2007, 27(3): 540-544.

[6] Hans Joachim Frasch, Gerhard Steinmeiz, Carl Zeiss. Monte Carlo methods in raytracing software [C]. SPIE, 2002, 4769: 55-64.

[7] J Mackey. Accuracy and efficiency of raytracing photoionisation algorithms [J]. Astronomy & Astrophysics, 2012, 539: A147-A161.

[8] Matthias B Hulin, Johannes Hanika, Wolfgang Heidrich. Polynomial optics: a construction kit for efficient ray-tracing of lens systems [J]. Computer Graphics Forum, 2012, 31(4): 1375-1383.

[9] 涂浩, 陈家璧, 秦汉, 等. 基于提高LED阵列远场照度的设计[J]. 照明工程学报, 2013, 24(1): 74-80.

Tu Hao, Chen Jiabi, Qin Han, et al.. An optical design based on improving LED array far field illumination intensity [J]. China Illuminating Engineering Journal, 2013, 24(1): 74-80.

[10] Michael Bass. Handbook of Optics (3rd edn.) [M]. Washington DC: Optical Society America, 2009. 42-127.

[11] 蒋金波, 杜雪, 李荣彬. 汽车照明系统的设计及超精密自由曲面加工技术[J]. 照明工程学报, 2008, 19(3): 46-52.

Jiang Jinbo, To Sandy, W B Lee. Design and fabrication of freeform feflector for automotive lighting system [J]. China Illuminating Engineering Journal, 2008, 19(3): 46-52.

[12] Qingfeng Wang, Dewen Cheng, Yongtian Wang, et al.. Design, tolerance, and fabrication of an optical see-through head-mounted display with free-form surface elements [J]. Appl Opt, 2013, 52(7): 88-99.

[13] ZEMAX Manual. Optical Design Program User′s Guide [M]. ZEMAX Development Corporation, 2009. 266-285.

[14] Bin-Juine Huang, Chun-Wei Chen, Chin-Dian Ong, et al.. Development of constant-power driving control for light-emitting-diode (LED) luminaire [J]. Applied Thermal Engineering, 2013, 50(1): 645-651.

[15] Diego G Lamar, Manual Arias, Alberto Rodriguez. Design-oriented analysis performance evaluation of a low-cost high-brightness LED driver based on flyback power factor corrector [J]. IEEE Trans Industrial Electronics, 2013, 60(7): 2614-2626.

严强, 高椿明, 生艳梅, 陈霄, 杨俊. LED照明准直透镜结构优化设计[J]. 激光与光电子学进展, 2013, 50(11): 112203. Yan Qiang, Gao Chunming, Sheng Yanmei, Chen Xiao, Yang Jun. Optimization Design of LED Collimating Lens[J]. Laser & Optoelectronics Progress, 2013, 50(11): 112203.

LED照明准直透镜结构优化设计下载： 764次

关于本站 Cookie 的使用提示

全站搜索

LED照明准直透镜结构优化设计 下载： 764次

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

LED照明准直透镜结构优化设计下载： 764次