[1] 殷建玲, 黄旭光, 刘颂豪. 光子晶体波导可调光衰减器[J]. 中国激光, 2007, 34(5): 671-674.

    Yin Jianling, Huang Xuguang, Liu Songhao. A variable optical attenuator based on the photonic crystal waveguide[J]. Chinese J Lasers, 2007, 34(5): 671-674.

[2] 刘英明, 徐静, 钟少龙, 等. 基于MEMS微镜的可调光学衰减器[J]. 光电子·激光, 2012, 23(12): 2287-2291.

    Liu Yingming, Xu Jing, Zhong Shaolong, et al.. Variable optical attenuator based on MEMS micromirror[J]. Journal of Optoelectronics·Laser, 2012, 23(12): 2287-2291.

[3] 张云聪, 陈哲, 江沛凡, 等. 全光纤热光型可变光衰减器[J]. 中国激光, 2007, 34(8): 1110-1114.

    Zhang Yuncong, Chen Zhe, Jiang Peifan, et al.. All-fiber thermo-optical variable optical attenuator[J]. Chinese J Lasers, 2007, 34(8): 1110-1114.

[4] Yuntao L, Jinzhong Y, Yuanyuan C, et al.. Analysis of temperature dependence of silicon-on-insulator thermo-optic attenuator[J]. Chinese Physics Letters, 2007, 24(2): 465-467.

[5] Qing F,Peng C, Hongli X, et al.. Low power-consumption and high response frequency thermo-optic variable optical attenuators based on silicon-on-insulator materials[J]. Chinese Physics Letters, 2005, 22(6): 1452-1455.

[6] Jiang X, Li X, Zhou H, et al.. Compact variable optical attenuator based on multimode interference coupler[J]. IEEE Photonics Technology Letters, 2005, 17(11): 2361-2363.

[7] Li D X, Zhang Y W, Liu L Y, et al.. Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials[J]. Opt Express, 2006, 14(13): 6029-6034.

[8] Kim J T, Choi C G. Polymeric PLC-type thermo-optic optical attenuator fabricated by UV imprint technique[J]. Optics Communications, 2006, 257(1): 72-75.

[9] Sahu P P. Variable optical attenuator using thermo-optic two-mode interference device with fast response time[J]. Appl Opt, 2009, 48(21): 4213-4218.

[10] Xiao G Z, Zhang Z Y, Grover C P. A variable optical attenuator based on a straight polymer-silica hybrid channel waveguide[J]. IEEE Photonics Technology Letters, 2004, 16(11): 2511-2513.

[11] Li J, Li J. Variable optical attenuator based on a bent polymer/SiON waveguide[C]. SPIE, 2007, 6781: 678158.

[12] 王微, 孙小强, 王希斌, 等. 低功耗聚合物 Mach-Zehnder 热光开关[J]. 光子学报, 2010, 39(4): 610-613.

    Wang Wei, Sun Xiaoqiang, Wang Xibin, et al.. Low power consumption polymer thermo-optic switch with Mach-Zehnder interferometer[J]. Acta Photonica Sinica, 2010, 39(4): 610-613.

[13] Diemeer M B J. Polymeric thermo-optic space switches for optical communications[J]. Optical Materials, 1998, 9(1): 192-200.

[14] 张琨, 岳远斌, 李彤, 等. 感应耦合等离子体刻蚀在聚合物光波导制作中的应用[J]. 中国光学, 2012, 5(1): 64-70.

    Zhang Kun, Yue Yuanbin, Li Tong, et al.. Application of ICP etching in fabrication of polymer optical waveguide[J]. Chinese Optics, 2012, 5(1): 64-70.

[15] Yan Y F, Zheng C T, Liang L, et al.. Response-time improvement of a 2×2 thermo-optic switch with polymer/silica hybrid waveguide[J]. Optics Communications, 2012, 285(18): 3758-3762.

[16] Petermann K. Properties of optical rib-guides with large cross-section[J]. Archivfur Elekronik und Uberetragungstechnik, 1976, 30(3): 139-140.

[17] Laurentis M, Irace A, Breglio G. Determination of single mode condition in dielectric rib waveguide with large cross section by finite element analysis[J]. Journal of Computational Electronics, 2007, 6(1-3): 285-287.

[18] Moosburger R, K Petermann. 4×4 digital optical matrix switch using polymeric oversized rib waveguides[J]. IEEE Photonics Technology Letters, 1998, 10(5): 684-686.