[1] 陈平, 于祺, 孙明, 等. 高性能热塑性树脂基复合材料的研究进展［J］. 纤维复合材料, 2005(2): 52-57.(Chen Ping, Yu Qi, Sun Ming, et al. Advances in high performance FRTP composites.Fiber Composites,2005(2): 52-57)

[2] 陈洁, 熊翔, 肖鹏. 高导热C/C复合材料的研究进展［J］. 材料导报, 2006,20(7): 431-435.(Chen Jie, Xiong Xiang, Xiao Peng. Research and development of high-thermal conductivity carbon/carbon composites.Mater Rev,2006,20(7): 431-435)

[3] Rodden W S O, Kudesia S S, Hand D P, et al. A comprehensive study of the long pulse Nd: YAG laser drilling of multi-layer carbon fibre composites［J］.Optics Communications,2002,210(3/6): 319-328.

[4] Hirogaki T, Aoyama E, Inoue H, et al. Laser drilling of blind via holes in aramid and glass/epoxy composites of multi-layer printed wiring boards［J］.Composites,2001,32(7): 963-968.

[5] Young T, O’Driscoll D. Impact of ND-YAG laser drilled holes on the strength and stiffness of laminar flow carbon fibre reinforced composite panels［J］.Composite,2002,33(1): 1-9.

[6] Lachaud J, Aspa Y, Vignoles G. Analytical modeling of the steady state ablation of a 3D C/C composite［J］.International Journal of Heat and Mass Transfer,2008,51(9/10): 2614-2627.

[7] Pan C T, Hocheng H. The anisotropic heat-affected zone in the laser grooving of fiber-reinforced composite material［J］.Journal of Materials Processing Technology,1996,62(1/3): 54-60.

[8] 黄国君, 杨治星, 段祝平. 激光-载荷联合作用下碳纤维/环氧树脂板的断裂阈值研究［J］. 强激光与粒子束, 1999,11(6): 677-681.(Huang Guojun, Yang Zhixing, Duan Zhuping. Investigation on the fracture threshold of woven carbon-fiber/epoxy plates under mechanical loading and heating by incident laser beams.High Power Laser and Particle Beams,1999,11(6): 677-681)

[9] 陈明, 龙连春, 刘世炳, 等. 激光辐照与拉伸预应力作用下复合材料试件的破坏研究［J］. 应用力学学报, 2010,27(2): 412-417.(Chen Ming, Long Lianchun, Liu Shibing, et al. Destruction of composite material under tensile pre-stressing and laser irradiation.Chinese Journal of Applied Mechanics,2010,27(2): 412-417)

[10] 王贵兵, 刘仓里. 芳纶纤维复合材料对激光的吸收特性研究［J］. 强激光与粒子束, 2003,15(11): 1065-1067.(Wang Guibing, Liu Cangli. Absorption characteristics of the composite reinforced by polyaryl amide fibers irradiated by high power laser.High Power Laser and Particle Beams,2003,15(11): 1065-1067)

[11] 张永强, 王伟平, 唐小松, 等. 两种纤维增强复合材料与连续激光耦合规律［J］. 强激光与粒子束, 2007,19(10): 1599-1602.(Zhang Yongqiang, Wang Weiping, Tang Xiaosong, et al. Coupling rules of two fiber reinforced composites with continuous wave laser.High Power Laser and Particle Beams,2007,19(10): 1599-1602)

[12] 张剑, 李思简. 复合材料大层数层合板热变形热应力有限元分析［J］. 固体力学学报, 1997,18(4): 359-364.(Zhang Jian, Li Sijian. Thermal stress of composite laminated structure with a large number of layers.Acta Mechanica Solida Sinica,1997,18(4): 359-364)

[13] 丁升, 王建国, 王玉恒, 等. 激光辐照热力耦合问题的相似性［J］. 强激光与粒子束, 2005,17(9): 1331-1334.(Ding Sheng, Wang Jianguo, Wang Yuheng, et al. Similarity of thermo-mechanical effect induced by high energy laser beam.High Power Laser and Particle Beams,2005,17(9): 1331-1334)

[14] 陈明. 激光辐照下复合材料结构的响应分析与试验测试［D］. 北京: 北京工业大学, 2010: 13-14.(Chen Ming. Response analysis and experimental test of composite structure irradiated by laser. Beijing: Beijing University of Technology, 2010: 13-14)

[15] 张骏华, 盛祖明, 孙继桐. 导弹和运载火箭复合材料结构设计指南［M］. 北京: 中国宇航出版社, 1999: 14-35.(Zhang Junhua, Sheng Zuming, Sun Jitong. Missile and launch vehicle composite structure design guidelines. Beijing: China Astronautic Publishing House, 1999: 14-35)

[16] 尹福炎. 瞬态加热条件下高温应变计测量误差修正方法［J］. 强度与环境, 2005,32(1): 36-42.(Yin Fuyan. Correction technique for high temperature strain gage under transient heating conditions.Structure and Environment Engineering,2005,32(1): 36-42)