[1] 吴则中, 于维成, 路广元. 采用喷丸强化工艺提高抽油杆的疲劳寿命[J]. 石油机械, 1991, 19(6): 1-5.

[2] 王迎, 康达昌. 抽油杆表面滚压强化的试验研究[J]. 热加工工艺, 2004（6）: 16-18.

    Wang Ying, Kang Dachang. Experimental study on surface peening of pumping rod by rolling technology[J]. Hot Working Technology, 2004(6): 16-18.

[3] Vasu A, Hu Y X , Grandhi R V. Differences in plasticity due to curvature in laser peened components[J]. Surface and Coatings Technology, 2013, 235: 648-656.

[4] 高立, 张永康. 镍-钴合金杆料激光冲击强化的实验和数值模拟[J]. 激光技术, 2006, 30(5): 507-510.

    Gao Li, Zhang Yongkang. Experimental and numerical simulation of laser shock strengthening of Ni-Co alloy pole[J]. Laser Technology, 2006, 30(5): 507-510.

[5] 陈瑞芳, 陈玉晓, 花银群. 几何形状对激光冲击波诱发残余应力场的影响[J]. 江苏大学学报(自然科学版), 2011, 32(2): 190-194.

    Chen Ruifang, Chen Yuxiao, Hua Yinqun. Geometrical effects on residual stress in TC4 titanium alloy subject to laser shock processing[J]. Journal of Jiangsu University (Natural Science Edition), 2011, 32(2): 190-194.

[6] 吴先前, 黄晨光, 宋宏伟. 激光冲击强化诱导的残余应力影响因素分析[J]. 中国激光, 2010, 37(10): 2632-2637.

    Wu Xianqian, Huang Chenguang, Song Hongwei. Parameters analysis of residual stress induced by laser shock processing[J]. Chinese J Lasers, 2010, 37(10): 2632-2637.

[7] 张兴权, 章艳, 段士伟, 等. 圆杆在激光冲击作用下动态响应的数值模拟[J]. 中国激光, 2015, 42(9): 0903009.

    Zhang Xingquan, Zhang Yan, Duan Shiwei, et al. Numerical simulation of dynamic response of round rod subjected to laser shocking[J]. Chinese J Lasers, 2015, 42(9): 0903009.

[8] 赖志林, 汪诚, 李应红, 等. 激光冲击强化与超声喷丸对1Cr11Ni2W2MoV不锈钢疲劳性能的影响[J]. 激光与光电子学进展, 2013, 50(5): 051403.

    Lai Zhilin, Wang Cheng, Li Yinghong, et al. Effect of laser shock peening and ultrasonic shot peening on fatigue property of 1Cr11Ni2W2MoV stainless steel[J]. Laser & Optoelectronics Progress, 2013, 50(5): 051403.

[9] 胡永祥, 姚振强, 胡俊. 激光冲击强化残余应力场的数值仿真分析[J]. 中国激光, 2006, 33(6): 846-851.

    Hu Yongxiang, Yao Zhenqiang, Hu Jun. Numerical simulation of residual stress field for laser shock processing[J]. Chinese J Lasers, 2006, 33(6): 846-851.

[10] Ding K, Ye L. FEM simulation of two sided laser shock peening of thin sections of Ti-6Al-4V alloy[J]. Surface Engineering, 2003, 19(2): 127-133.

[11] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 1990, 68(2): 775-784.

[12] Yang C H, Hodgson P D, Liu Q C, et al. Geometrical effects on residual stresses in 7075-T7451 aluminum alloy rods subject to laser shock peening[J]. Journal of Materials Processing Technology, 2008, 201(1): 303-309.

[13] Hong X, Wang S B, Guo D H, et al. Confining medium and absorptive overlay: Their effects on a laser-induced shock wave[J]. Optics and Lasers in Engineering, 1998, 29(6): 447-455.

[14] Johnson G R, Cook W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]. Proceedings of the 7th International Symposium on Ballistics, 1983, 21: 541-547.

[15] Fabbro R, Peyre P, Berthe L, et al. Physics and applications of laser-shock processing[J]. Journal of Laser Applications, 1998, 10(6): 265-279.

[16] 徐斌, 伍晓宇, 罗烽, 等. 0Cr18Ni9 不锈钢箔的飞秒激光烧蚀[J]. 光学 精密工程, 2012, 20(1): 45-51.

    Xu Bin, Wu Xiaoyu, Luo Feng, et al. Ablation of 0Cr18Ni9 stainless steel films by femtosecond laser[J]. Optics and Precision Engineering, 2012, 20(1): 45-51.

[17] 姜银方, 来彦玲, 张磊, 等. 激光冲击材料表面“残余应力洞”形成规律与分析[J]. 中国激光, 2010, 37(8): 2073-2079.

    Jiang Yinfang, Lai Yanling, Zhang Lei, et al. Investigation of residual stress hole on a metal surface by laser shock[J]. Chinese J Lasers, 2010, 37(8): 2073-2079.

[18] 胡永祥. 激光冲击处理工艺过程数值建模与冲击效应研究[D]. 上海: 上海交通大学, 2008.

    Hu Yongxiang. Research on the numerical simulation and impact effects of laser shock processing[D]. Shanghai: Shanghai Jiao Tong University, 2008.

[19] Wei X L, Ling X. Numerical modeling of residual stress induced by laser shock processing[J]. Applied Surface Science, 2014, 301(20): 557-563.

[20] Kim J H, Kim Y J, Kim J S. Effects of simulation parameters on residual stresses for laser shock peening finite element analysis[J]. Journal of Mechanical Science and Technology, 2013, 27(7): 2025-2034.

[21] Luo K Y, Lu J Z, Wang Q W, et al. Residual stress distribution of Ti-6Al-4V alloy under different ns-LSP processing parameters[J]. Applied Surface Science, 2013, 285(19): 607-615.

[22] 汪诚, 赖志林, 何卫锋, 等. 激光冲击次数对1Cr11Ni2W2MoV不锈钢高周疲劳性能的影响[J]. 中国激光, 2014, 41(1): 0103001.

    Wang Cheng, Lai Zhilin, He Weifeng, et al. Effect of multi-impact on high cycle fatigue properties of 1Cr11Ni2W2MoV stainless steel subject to laser shock processing[J]. Chinese J Lasers, 2014, 41(1): 0103001.