Photonics Research, 2019, 7 (12): 12001461, Published Online: Nov. 20, 2019
4 × 4 MIMO fiber-wireless transmission based on an integrated four-channel directly modulated optical transceiver
Figures & Tables
Fig. 1. Structure of (a) TOSA and (b) ROSA. (c) The photographs of the fabricated TOSA module. (d) Transmission of optical signals in the 42° oblique angle De-mux AWG-PLC.
Fig. 2. (a) Simulated results of the optical CE performance versus distance and oblique angle. (b) CE performance versus different distance when the oblique angle of the De-mux AWG-PLC is set at 40°, 42°, and 44°.
Fig. 3. Photographs of the fabricated optical transceiver module, PD array, TIA array, AWG-PLC, and DFB-LD.
Fig. 4. Scattering parameter performance versus the frequency for each lane of the fabricated optical transceiver module: (a) S11 and (b) S21. (c) Measured SFDR3 performance versus different frequency for each lane of the fabricated optical transceiver. (d) SFDR performance of lane 3 when the central frequency is 6 GHz, the fundamental item is the output two-tone RF signal, and IMD3 is the third-order intermodulation distortion.
Fig. 5. Schematic diagram of the modified single-loop LLL algorithm. H : matrix of the MIMO channel. Q , R are the matrix after QR decomposition of H , Q is a unitary matrix, and R is an uptriangular matrix. Im is an identity matrix. μ is the correction factor for R , H , and T . G is an orthogonal rotation matrix.
Fig. 6. Experimental setup of the proposed 4 × 4 MIMO 16QAM-OFDM RoF system for both (a) downlink and (b) uplink.
Table1. Real Multiplication for the Original LLL Algorithm, the Proposed LR Algorithm, and the Optimal MLSE in an MIMO System
|
Di Zhang, Yao Ye, Lei Deng, Di Li, Haiping Song, Yucheng Zhang, Minming Zhang, Shu Wang, Deming Liu. 4 × 4 MIMO fiber-wireless transmission based on an integrated four-channel directly modulated optical transceiver[J]. Photonics Research, 2019, 7(12): 12001461.