[1] 平修二. 热应力与热疲劳(基础理论与设计应用)［M］. 郭廷伟, 李安定, 译. 北京: 国防工业出版社, 1984.

[2] 李福海, 佟 鑫, 刘 敏, 等. 32Cr3Mo1V表面激光合金化层热疲劳性能的研究［J］. 材料研究与应用, 2011, 5(2): 97-104.

    Li Fuhai, Tong Xin, Liu Min, et al. Thermal fatigue resistance of laser surface alloying layers on the surface of 32Cr3Mo1V substrate［J］. Materials Research and Application, 2011, 5(2): 97-104.

[3] Kundalkar D, Mavalankar M, Tewari A, et al. Effect of gas nitriding on the thermal fatigue behavior of martensitic chromium hot-work tool steel［J］. Materials Science and Engineering A, 2016, 651: 391-398.

[4] Birol Y. Thermal fatigue testing of Inconel 617 and Stellite 6 alloys as potential tooling materials for thixoforming of steels［J］. Materials Science and Engineering A, 2010, 527(7-8): 1938-1945.

[5] Fantini V, Serri L, Bianchi P. Laser thermal shock and fatigue testing system［C］. SPIE, 1997, 3097: 538-545.

[6] Rettig U, Bast U, Steiner D, et al. Characterization of fatigue mechanisms of thermal barrier coatings by a novel laser-based test［C］. The International Gas Turbine and Aeroengine Congress and Exhibition, Stockholm, 1998: 1-8.

[7] Kutsuna M, Fujita S, Sugita Y, et al. Thermal fatigue test for turbine housing by a pulse YAG Laser［C］. SPIE, 2000, 3888: 438-445.

[8] 贾 力, 孙智刚. 激光热疲劳实验系统在预测轧辊热疲劳性能上的研究［J］. 工业加热, 2009, 38(5): 63-64.

    Jia Li, Sun Zhigang. Investigation on laster system used on forecasting thermal fatigue performance of roll［J］. Industrial Heating, 2009, 38(5): 63-64.

[9] 景 勤, 赵 亮, 苑 辉, 等. 激光脉冲加热条件下Zr基非晶合金晶化及热疲劳行为［J］. 中国科学: 物理学 力学 天文学, 2010, 40(6): 706-710.

[10] 宋宏伟, 虞 钢, 王立新, 等. 激光诱发活塞的热负荷［J］. 中国激光, 2006, 33(5): 701-704.

    Song Hongwei, Yu Gang, Wang Lixin, et al. Laser-induced thermal loadings on pistons［J］. Chinese J Lasers, 2006, 33(5): 701-704.

[11] 宋宏伟, 李少霞, 虞 钢. 基于数值模拟的激光热负荷光强分布设计［J］. 中国激光, 2006, 33(6): 842-845.

    Song Hongwei, Li Shaoxia, Yu Gang. Intensity distribution design for laser-induced thermal loading based on numerical simulation［J］. Chinese J Lasers, 2006, 33(6): 842-845.

[12] 谭建松, 庞 铭, 解志民, 等. 活塞激光热负荷数值模拟［J］. 中国激光, 2010, 37(4): 970-974.

    Tan Jiansong, Pang Ming, Xie Zhimin, et al. Numerical simulation of thermal loading on piston by laser［J］. Chinese J Lasers, 2010, 37(4): 970-974.

[13] 庞 铭, 谭建松, 解志民. 活塞激光热负荷应力场数值模拟［J］. 光学与光电技术, 2011, 9(1): 17-20.

    Pang Ming, Tan Jiansong, Xie Zhimin. Numerical simulation of stress field for laser thermal loading of piston［J］. Optics and Optoelectronic Technology, 2011, 9(1): 17-20.

[14] 聂树真, 孙 辉, 虞 钢, 等. 非对称非均匀分布整形光束用于激光热负荷试验研究［J］. 激光与光电子学进展, 2015, 52(9): 091408.

    Nie Shuzhen, Sun Hui, Yu Gang, et al. Study on laser thermal loadingtest with non-symmetric and non-uniform shaped laser beam［J］. Laser & Optoelectronics Progress, 2015, 52(9): 091408.

[15] Song H W, Yu G, Tan J S, et al. Thermal fatigue on pistons induced by shaped high power laser. Part I: Experimental study of transient temperature field and temperature oscillation［J］. International Journal of Heat and Mass Transfer, 2008, 51(3-4): 757-767.

[16] 吴维泽. 提高铸轧辊套寿命的研究［D］. 沈阳: 东北大学, 2005: 29.

    Wu Weize. Research on the raising the life of the casting roll shell［D］. Shenyang: Northeastern University, 2005: 29.

[17] 蔺秀川, 邵天敏. 利用集总参数法测量材料对激光的吸收率［J］. 物理学报, 2001, 50(5): 854-859.

    Lin Xiuchuan, Shao Tianmin. Lumped method for the measurement of laser absorptance of materials［J］. Acta Physica Sinica, 2001, 50(5): 854-859.

[18] 崔春阳, 吴 炜, 虞 钢, 等. 球墨铸铁材料对激光的吸收率［J］. 中国激光, 2006, 33(7): 977-980.

    Cui Chunyang, Wu Wei, Yu Gang, et al. On laser absorptivity of ductile iron［J］. Chinese J Lasers, 2006, 33(7): 977-980.

[19] 李善德. 铸轧辊辊套热结构耦合分析及其疲劳寿命研究［D］. 长沙: 中南大学, 2006: 22.

    Li Shande. Thermal structural coupling and the fatigue life of the roll shell［D］. Changsha: Central South University, 2006: 22.