[1] 杨永强, 吴伟辉, 来克娴, 等.金属零件选区激光熔化直接快速成形工艺及最新进展［J］.航空制造技术, 2006(2)：73-76.

    YANG YONGQIANG, WU WEIHUI, LAI KEXIAN, et al.Newest progress of direct rapid prototyping of metal part by selective laser melting［J］.Aviation Manufacturing Technology, 2006(2)：73-76.

[2] 吴伟辉, 杨永强.选区激光熔化快速成形系统的关键技术［J］.机械工程学报, 2007, 43(8)：175-180.

    WU WEIHUI, YAN YONGQIANG.Key technologies of selective laser melting rapid prototyping system［J］.Journal of Mechanical Engineering, 2007, 43(8)：175-180.

[3] READ N, WANG W, ESSA K, et al.Selective laser melting of AlSi10Mg alloy：Process optimisation and mechanical properties development［J］.Materials & Design, 2015(65)：417-424.

[4] WEINGARTEN C, BUCHBINDER D, PIRCH N, et al.Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg［J］.Journal of Materials Processing Technology, 2015(221)：112-120.

[5] YASA E, KRUTH J P.Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting［J］.Procedia Engineering, 2011, 19(1)：389-395.

[6] 李洋, 陈长军, 王晓南, 等.选区激光熔化技术制备316L多孔不锈钢工艺及性能研究［J］. 应用激光, 2015, 35(3)：319-323.

    LI YANG, CHEN CHANGJUN, WANG XIAONAN, et al.Preparation and properties of 316L porous stainless steel by selective laser melting technology［J］.Applied Laser, 2015, 35(3)：319-323.

[7] ZHANG S, GUI R, WEI Q, et al.Cracking behavior and formation mechanism of TC4 alloy formed by selective laser melting［J］.Journal of Mechanical Engineering, 2013, 49(23)：21-27.

[8] MUMTAZ K, HOPKINSON N.Top surface and side roughness of Inconel 625 parts processed using selective laser melting［J］.Rapid Prototyping Journal, 2009, 15(2)：96-103.

[9] 王平怀, 王伯健, 宋景娜.淬火温度对2Cr13不锈钢组织和性能的影响［J］.热加工工艺, 2008, 37(4)：71-73.

    WANG PINGHUAI, WANG BOJIAN, SONG JINGNA.Effect of quenching temperature on microstructure and properties of 2Cr13 stainless steel［J］.Thermal Process Technology, 2008, 37(4)：71-73.

[10] 张学军, 唐思熠, 肇恒跃, 等.3D打印技术研究现状和关键技术［J］.材料工程, 2016, 44(2)：122-128.

    ZHANG XUEJUN, TANG SIYI, ZHAO HENGYUE, et al.Research status and key technologies of 3D printing technology［J］.Journal of Materials Engineering, 2016, 44(2)：122-128.